2024 Marin Nicasio 3

Archived: Frame: All-New SteezyR Double Butted CrMo, Beyond Road Geometry, Tapered Headtube w/ Integrated Headset, Investment Cast Dropouts, Thru-Axle, Disc Brake, Fender and Rack Mounts and Hidden Kickstand Mount (adapter sold separately) · Fork: Marin Full Carbon w/ Tapered Steerer, 12mm Thru-Axle, Flat-Mount Disc, Fender Eyelets · Carbon Fiber

• Check paint damage, vent holes and accessible internal surfaces for corrosion. Look for dents, bent tubes and cracking around welded or brazed joints.
• Inspect the fork crown, blades, dropouts and visible steerer area. Check that it is straight, securely installed and free of cracks or impact damage.

Archived: Shifters: Shimano GRX, RX600, 1x11-Speed · Rear derailleur: Shimano GRX, RX812, 11-Speed · Crankset: FSA Gossamer Pro, MegaExo, 42T Ring · Bottom bracket: FSA MegaExo, BSA Threaded · Cassette: Shimano, CS-M8000, 11-42T · Chain: KMC X11

• Shift through every available gear under light load. Hesitation, skipping or inconsistent indexing can reflect wear, damage, poor adjustment or mismatched replacement parts.
• Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: (F) Shimano GRX Hydraulic Disc, 160mm Rotor / (R) Shimano GRX Hydraulic Disc, 160mm Rotor; Levers: Shimano w/ Integrated Shifters

• Squeeze each lever firmly. It should feel consistent and return cleanly. Check levers, hoses and calipers for fluid, inspect pad thickness and contamination, and examine rotors for wear or bending.

Archived: Rims: Novatec, G24 Carbon, 24mm Internal, 24 Hole, Tubeless Compatible · Hubs: (F) Forged Aluminum Alloy, Disc, 24H / (R) Forged Aluminum Alloy, Disc, 24H, HG11 Driver · Front tire: Maxxis Reaver, 700x45, Exo Casing, Folding Bead, Tubeless-Compatible · Rear tire: Maxxis Reaver, 700x45, Exo Casing, Folding Bead, Tubeless-Compatible

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play. Inspect the carbon rims closely for impact marks, cracks, delamination or damage around spoke holes and bead hooks.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance.
• Confirm whether the bike is actually set up tubeless, whether both tires hold pressure, and when sealant and rim tape were last serviced.

Archived: Headset: FSA No.42/ACB · Handlebar: Marin Butted Alloy, Compact 16º Flared Drop · Stem: Marin 3D Forged Alloy · Seatpost: Marin Alloy, 27.2mm · Saddle: Marin Beyond Road Concept

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
• Check that the seatpost moves for adjustment and that the saddle, post and clamp hold securely without cracks, severe corrosion or damaged hardware.