Uses front tire 700C×38; rear size isn’t listed.
Velopedia Bicycle Archive
1998 Trek 7600
Original specifications: Shimano Deore LX · 8-speed · mechanical rear derailleur · 700c wheels · legacy reference geometry.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #73615- Model year
- 1998
- Category
- Hybrid
- Original MSRP
- $779.99
- Sizes
- 15", 17", 19", 21", 23", womens 17", womens 20"
- Colors
- Titanium
- Geometry
- Legacy reference
- In this record
- 27 specifications · original MSRP · geometry
Model history 7 other years
Browse other years
Compare side by side
Identification clues
1998 archived details
- Published colors
- Titanium
- Frame
- 7005 aluminum
- Original equipment
- Hybrid Mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original build7005 aluminum · Hybrid Mix · 700c wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | 7005 aluminum |
| Fork | Trek |
| Fork Material | Chromoly, unicrown crown |
Drivetrain
| Component Group | Hybrid Mix |
|---|---|
| Shifters | Grip Shift SRT-600 |
| Front Derailleur | Shimano STX-RC top-swing, top-pull |
| Rear Derailleur | Shimano Deore LX SGS |
| Crankset | Shimano Alivio, 22/32/42 teeth |
| Bottom Bracket | Shimano BB-UN52, 113mm spindle |
| BB Shell Width | 73mm English |
| Rear Cogs | 8-speed, 11 - 30 teeth |
| Chain | Sachs PC-41, 1/2 x 3/32" |
| Pedals | Resin body/aluminum cage |
Brakes
| Brakes | Shimano Deore LX V-Brake brakes, Avid AD-1.0 L levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" Tange-Seiki |
|---|---|
| Handlebar | System 1 |
| Handlebar Extensions | Not included |
| Stem | Aluminum |
| Saddle | Selle Bassano Vuelta |
| Seatpost | Polygon PM-900, 27.2mm diameter |
Wheels & Tires
| Hubs | Front: Shimano Alivio, Rear: Shimano STX-RC |
|---|---|
| Rims | Matrix Vapor, 32-hole |
| Spokes | Stainless steel, 2.0mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 700 x 38c Trek Invert II |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 5 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 528.3 mm |
| Head-tube angle | 70° |
| Seat-tube angle | 74° |
| Chainstay / rear center | 434.3 mm |
| Wheelbase | 1021.1 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
27.2mm diameter
More parts (5)Fewer parts
Avid AD-1.0 L levers
113mm spindle
22/32/42 teeth
top-pull
Based on the original build. Check fit and installed parts before ordering.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 38c Trek Invert II
- Drivetrain
- 8-speed
- Seatpost diameter
- 27.2 mm
- Bottom bracket / shell
- Shimano BB-UN52, 113mm spindle · 73mm English
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Trek · Chromoly, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Group: Hybrid Mix · Shifters: Grip Shift SRT-600 · Front derailleur: Shimano STX-RC top-swing, top-pull · Rear derailleur: Shimano Deore LX SGS · Crankset: Shimano Alivio, 22/32/42 teeth · Bottom bracket: Shimano BB-UN52, 113mm spindle · Rear cogs: 8-speed, 11 - 30 teeth · Chain: Sachs PC-41, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Shimano Deore LX V-Brake brakes, Avid AD-1.0 L levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Matrix Vapor, 32-hole · Hubs: Front: Shimano Alivio, Rear: Shimano STX-RC · Front tire: 700 x 38c Trek Invert II
Controls and contact points
Archived: Headset: 1 1/8" Tange-Seiki · Handlebar: System 1 · Stem: Aluminum · Seatpost: Polygon PM-900, 27.2mm diameter · Saddle: Selle Bassano Vuelta · Pedals: Resin body/aluminum cage
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.


