Lowest1.29:1
Highest3.14:1
Total range243%
Estimated speed At 90 RPM
Lowest gear
Highest gear
Uses front tire 26×2.125; rear size isn’t listed.
Velopedia Bicycle Archive
2007 Sun Bicycles Key West
Original specifications: Cruiser Mix drivetrain · 26" wheels · 40 lb published weight.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #94845- Model year
- 2007
- Category
- Cruiser
- Sizes
- 20", 23", womens 16"
- Colors
- Ball-Burnished
- Weight
- 40 lb
- In this record
- 26 specifications
Model history 5 other years
Browse other years
Compare side by side
Identification clues
2007 archived details
- Published colors
- Ball-Burnished
- Frame
- 7005 aluminum
- Original equipment
- Cruiser Mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original build7005 aluminum · Cruiser Mix · 26" wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | 7005 aluminum |
| Fork | Sun |
| Fork Material | High-tensile steel, unicrown crown |
Drivetrain
| Component Group | Cruiser Mix |
|---|---|
| Shifters | SRAM MRX Comp |
| Front Derailleur | Top-pull/clamp-on 28.6mm |
| Rear Derailleur | Shimano Tourey Megarange |
| Crankset | Aluminum, 44 teeth |
| Bottom Bracket | Cartridge, 113mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 7-speed, 14 - 34 teeth |
| Chain | KMC Z410, 1/2 x 3/32" |
| Pedals | Platform, resin |
Brakes
| Brakes | Aluminum linear-pull brakes, aluminum linear-pull levers |
|---|
Cockpit & Contact Points
| Headset | 1" steel, threaded |
|---|---|
| Handlebar | Sun Steel Highriser |
| Stem | Aluminum |
| Saddle | Cruiser |
| Seatpost | Aluminum, 27.2mm diameter |
Wheels & Tires
| Hubs | Aluminum, nutted |
|---|---|
| Rims | Aluminum single wall, 36-hole |
| Spokes | Stainless steel, 14ga. (2.0mm) straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 26 x 2.125" Kenda Komfort |
| Wheel Size | 26" wheels |
No specifications match. Try a component name or clear your search.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
26 x 2.125" Kenda Komfort
Retailer offers
Continental Race King Performance Tubeless Tire Black, ShieldWall, 26x2.0
Replacement option
Kenda .125 Komfort on eBaySponsored links
Aluminum
27.2mm diameter
Retailer offers
Race Face Ride XC Seatpost Black, 27.2x375mm
Replacement option
Aluminum linear-pull brakes
aluminum linear-pull levers
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 26 x 2.125" Kenda Komfort
- Drivetrain
- 7-speed
- Seatpost diameter
- 27.2 mm
- Bottom bracket / shell
- Cartridge, 113mm spindle · 68mm English
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Sun · High-tensile steel, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Group: Cruiser Mix · Shifters: SRAM MRX Comp · Front derailleur: Top-pull/clamp-on 28.6mm · Rear derailleur: Shimano Tourey Megarange · Crankset: Aluminum, 44 teeth · Bottom bracket: Cartridge, 113mm spindle · Rear cogs: 7-speed, 14 - 34 teeth · Chain: KMC Z410, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Aluminum linear-pull brakes, aluminum linear-pull levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: Aluminum single wall, 36-hole · Hubs: Aluminum, nutted · Front tire: 26 x 2.125" Kenda Komfort
Controls and contact points
Archived: Headset: 1" steel, threaded · Handlebar: Sun Steel Highriser · Stem: Aluminum · Seatpost: Aluminum, 27.2mm diameter · Saddle: Cruiser · Pedals: Platform, resin
Have you owned this model?Help document firsthand fit, ride and maintenance details that may no longer be available.
This archive record has limited published detail. Share what would help another rider understand how this model fit, rode and held up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
- Category
- Cruiser
Same model · another year
Key West
- Category
- Cruiser
Same model · another year
Key West
- Frame
- Hi-tensile steel
- Fork
- Sun
Same brand and year
Atlas Industrial Bike
- Frame
- Hi-tensile steel
- Brakes
- Coaster brake rear
Same brand and year
Custom Cruiser Original
Same category and period
Marin Drakes Beach
- Frame
- 7005 Aluminum
- Groupset
- Cruiser Mix
Same category and period
Marin Drakes Beach 3 speed
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.