- Category
- Hybrid
Same model · another year
Velopedia Bicycle Archive
1998 Marin Stinson
Original specifications: Shimano Nexus drivetrain · 700c wheels · legacy reference geometry.
Planning to sell? Draft your listing
At a glance
Archive #79179- Model year
- 1998
- Category
- Hybrid
- Original MSRP
- $379.00
- Sizes
- 13.5", 15.5", 17.5", 19", 20.5", womens 17.5"
- Colors
- Matte forest green
- Geometry
- Legacy reference
- In this record
- 25 specifications · archived image · original MSRP · geometry
Model history 15 other years
Browse other years
Compare side by side
Identification clues
1998 archived details
- Published colors
- Matte forest green
- Frame
- Tange chromoly
- Original equipment
- Shimano Nexus
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildTange chromoly · Shimano Nexus · 700c wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | Tange chromoly |
| Fork | RST 800 |
| Fork Material | Aluminum/chromoly, triple-clamp crown |
Drivetrain
| Component Group | Shimano Nexus |
|---|---|
| Shifters | Shimano Nexus |
| Crankset | Aluminum, 44 teeth |
| Bottom Bracket | Shimano BB-CS11, 116mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 4-speed internal, 19 teeth |
| Chain | KMC UG-50, 1/2 x 3/32" |
| Pedals | Resin |
Brakes
| Brakes | Shimano Nexus Roller brake brakes, Shimano Nexus levers |
|---|
Cockpit & Contact Points
| Headset | 1" Victor VP-H67 |
|---|---|
| Handlebar | Aluminum, 2" rise |
| Handlebar Extensions | Not included |
| Stem | Aluminum |
| Saddle | Marin Comfort |
| Seatpost | Aluminum micro-adjust, 27.0mm diameter |
Wheels & Tires
| Hubs | Front: Shimano Altus, Rear: Shimano Nexus Roller brake |
|---|---|
| Rims | Alex VP-18F, 36-hole |
| Spokes | Steel, 2.0mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 700 x 38c Marin Lite |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Size
Measurement
Measurement
—
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 552.4 mm |
| Head-tube angle | 71° |
| Seat-tube angle | 71° |
| Chainstay / rear center | 439.4 mm |
| Wheelbase | 1061.7 mm |
| Fork offset / rake | 44.4 mm |
Frame size not recorded.
Gearing
Original gearing is incomplete. Enter your setup to calculate ratios and cadence speeds.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
700 x 38c Marin Lite
Replacement search: 700cx38 bicycle tire Before ordering: Check rim type and tire clearance.
Shimano BB-CS11
116mm spindle
Aluminum micro-adjust
27.0mm diameter
More parts (1)Fewer parts
Alex VP-18F
36-hole
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 38c Marin Lite
- Drivetrain
- 4-speed
- Seatpost diameter
- 27 mm
- Bottom bracket / shell
- Shimano BB-CS11, 116mm spindle · 68mm English
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: RST 800 · Aluminum/chromoly, triple-clamp crown
Drivetrain
Check drivetrain wear →Archived: Group: Shimano Nexus · Shifters: Shimano Nexus · Crankset: Aluminum, 44 teeth · Bottom bracket: Shimano BB-CS11, 116mm spindle · Rear cogs: 4-speed internal, 19 teeth · Chain: KMC UG-50, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Shimano Nexus Roller brake brakes, Shimano Nexus levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Alex VP-18F, 36-hole · Hubs: Front: Shimano Altus, Rear: Shimano Nexus Roller brake · Front tire: 700 x 38c Marin Lite
Controls and contact points
Archived: Headset: 1" Victor VP-H67 · Handlebar: Aluminum, 2" rise · Stem: Aluminum · Seatpost: Aluminum micro-adjust, 27.0mm diameter · Saddle: Marin Comfort · Pedals: Resin
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.