Uses front tire 700C×38; rear size isn’t listed.
Velopedia Bicycle Archive
1998 Marin Point Reyes
Original specifications: Shimano Deore LX drivetrain · 700c wheels · legacy reference geometry.
Planning to sell? Draft your listing
At a glance
Archive #70711- Model year
- 1998
- Category
- Hybrid
- Original MSRP
- $859.00
- Sizes
- 13.5", 15.5", 17.5", 19", 20.5", womens 17.5"
- Colors
- Titanium polish
- Geometry
- Legacy reference
- In this record
- 27 specifications · archived image · original MSRP · geometry
Model history 16 other years
Browse other years
Compare side by side
Identification clues
1998 archived details
- Published colors
- Titanium polish
- Frame
- 7005 aluminum, butted
- Original equipment
- Shimano Deore LX
Clues, not proof of model year. Colors vary and components may have been replaced.
Original build7005 aluminum, butted · Shimano Deore LX · 700c wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | 7005 aluminum, butted |
| Fork | RST 802 |
| Fork Material | Aluminum/chromoly, triple-clamp crown |
Drivetrain
| Component Group | Shimano Deore LX |
|---|---|
| Shifters | Shimano Deore LX RapidFire SL |
| Front Derailleur | Shimano Deore LX top-swing, bottom-pull/clamp-on 31.8mm |
| Rear Derailleur | Shimano Deore XT SGS |
| Crankset | Shimano Deore LX, 22/32/44 teeth |
| Bottom Bracket | Shimano BB-UN52, 110mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 8-speed, 11 - 28 teeth |
| Chain | Shimano CN-IG70, 1/2 x 3/32" |
| Pedals | Aluminum cage w/clips & straps |
Brakes
| Brakes | Shimano modulated V brakes, Shimano Deore LX levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" YST Superlight |
|---|---|
| Handlebar | Marin Lite aluminum |
| Handlebar Extensions | Aluminum |
| Stem | Aluminum |
| Saddle | Ritchey Vector |
| Seatpost | Marin Lite Pro, 27.0mm diameter |
Wheels & Tires
| Hubs | Front: Shimano Deore LX, Rear: Shimano R080 |
|---|---|
| Rims | Mavic T 221, 36-hole |
| Spokes | DT stainless steel, 2.0mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 700 x 38c Marin Lite |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 552.4 mm |
| Head-tube angle | 71° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 439.4 mm |
| Wheelbase | 1061.7 mm |
| Fork offset / rake | 44.4 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
1/2 x 3/32"

SRAM PC-830 Chain One Color, 8 Speed
Replacement option
Shimano Deore LX levers
More parts (6)Fewer parts
110mm spindle
22/32/44 teeth
27.0mm diameter
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 38c Marin Lite
- Drivetrain
- 8-speed
- Seatpost diameter
- 27 mm
- Bottom bracket / shell
- Shimano BB-UN52, 110mm spindle · 68mm English
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: RST 802 · Aluminum/chromoly, triple-clamp crown
Drivetrain
Check drivetrain wear →Archived: Group: Shimano Deore LX · Shifters: Shimano Deore LX RapidFire SL · Front derailleur: Shimano Deore LX top-swing, bottom-pull/clamp-on 31.8mm · Rear derailleur: Shimano Deore XT SGS · Crankset: Shimano Deore LX, 22/32/44 teeth · Bottom bracket: Shimano BB-UN52, 110mm spindle · Rear cogs: 8-speed, 11 - 28 teeth · Chain: Shimano CN-IG70, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Shimano modulated V brakes, Shimano Deore LX levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Mavic T 221, 36-hole · Hubs: Front: Shimano Deore LX, Rear: Shimano R080 · Front tire: 700 x 38c Marin Lite
Controls and contact points
Archived: Headset: 1 1/8" YST Superlight · Handlebar: Marin Lite aluminum · Stem: Aluminum · Seatpost: Marin Lite Pro, 27.0mm diameter · Saddle: Ritchey Vector · Pedals: Aluminum cage w/clips & straps
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.


