2027 Liv Devote Advanced SL 1

Archived: Frame: Advanced SL-grade composite, 12x142mm thru-axle, disc, UDH dropout · Fork: Advanced SL-grade composite, full-composite, updated OverDrive steerer, 12mm thru-axle, disc · Carbon Fiber

• Inspect the frame in bright light, especially the head tube, bottom-bracket area, chainstays and clamped surfaces. Look for cracks, ripples, crushed sections or signs of impact.
• Inspect the fork crown, blades, dropouts and visible steerer area. Check that it is straight, securely installed and free of cracks or impact damage.

Archived: Shifters: SRAM Force XPLR AXS E1, 1x13 · Rear derailleur: SRAM Force XPLR AXS E1 · Crankset: SRAM Force XPLR AXS with power meter, 40t XS: 165mm, S: 165mm, M: 170mm, L: 172.5mm · Bottom bracket: SRAM DUB, press fit · Cassette: SRAM Force E1, 13-speed, 10x46 · Chain: SRAM Force E1

• Confirm every shift battery charges and every control operates. Shift through the full cassette under light load while checking pairing, derailleur alignment and response at both ends of the range.
• Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: SRAM Force AXS E1 hydraulic, SRAM PaceLine X rotors [F]160mm, [R]140mm

• Squeeze each lever firmly. It should feel consistent and return cleanly. Check levers, hoses and calipers for fluid, inspect pad thickness and contamination, and examine rotors for wear or bending.

Archived: Rims: Giant CXR 0 WheelSystem, hookless, carbon [F] 50mm, [R] 50mm · Hubs: [F] Giant Low Friction Aero Hub, Center Lock [R] Giant Low Friction Aero Hub, 60-tooth ratchet driver, Center Lock · Front tire: CADEX GXR, 700x45c, tubeless · Rear tire: CADEX GXR, 700x45c, tubeless

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play. Inspect the carbon rims closely for impact marks, cracks, delamination or damage around spoke holes and bead hooks.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance.
• Confirm whether the bike is actually set up tubeless, whether both tires hold pressure, and when sealant and rim tape were last serviced.

Archived: Handlebar: Liv Contact SLR XR Integrated XS: 70x380/420mm, S: 70x380/420mm, M: 80x380/420mm, L: 100x400/440mm · Stem: Liv Contact SLR XR Integrated XS: 60mm, S: 70mm, M: 80mm, L: 100mm · Seatpost: Giant Contact SLR XR D-Fuse, composite, 20mm offset · Saddle: Liv Grit SLR

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
• Check that the seatpost moves for adjustment and that the saddle, post and clamp hold securely without cracks, severe corrosion or damaged hardware.