2026 Kona Rove DL

Archived: 2026 Kona Rove DL · Cyclocross/Gravel · Published sizes: 48, 50, 52, 54, 56, 58

• Confirm the frame markings and seller description match this archived model. Note every component that differs from the published build.
• Record the frame serial number. It should be legible, unaltered and consistent with the seller’s ownership history.
• Find the size marking on the bicycle and confirm the fit before judging the condition or price.

Archived: Frame: Kona Butted Cromoly · Fork: Kona Cromoly

• Inspect the complete frame for cracks, dents, distortion, heavy abrasion, suspicious paint differences or evidence of a previous repair.
• Stand behind and in front of the bicycle to look for obvious frame, fork or wheel misalignment. Ask directly about crashes, transport damage and repairs.
• Inspect the fork crown, blades, dropouts and visible steerer area. Check that it is straight, securely installed and free of cracks or impact damage.

Archived: Shifters: Shimano CUES 6030 · Rear derailleur: Shimano CUES 6000 · Crankset: Shimano CUES 6030 40t / Length 48 165mm / 50 170mm / 52-54 172.5mm / 56-58 175mm · Bottom bracket: Shimano BSA 68mm · Cassette: Shimano CUES LG400 11-50t 11spd · Chain: Shimano CUES LG500

• Shift through every available gear under light load. Hesitation, skipping or inconsistent indexing can reflect wear, damage, poor adjustment or mismatched replacement parts.
• Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: Brake Calipers: Shimano CUES 6030; Front Brake Rotor: Shimano RT54 180mm 6B; Rear Brake Rotor: Shimano RT54 180mm 6B; Brake Levers: Shimano CUES 6030

• Inspect pads and braking surfaces, check the complete cable or hose path, and confirm both controls feel consistent and return cleanly.
• Before riding, test every installed brake separately at walking speed. Each should stop firmly and release cleanly without its control reaching the end of its usable travel.

Archived: Rims: WTB ST i23 TCS 2.0 · Hubs: (F) Shimano 105 12x100mm / (R) Shimano 105 12x142mm HG · Front tire: Maxxis Rambler 48-52 650x47mm / 54-58 700x40mm · Rear tire: Maxxis Rambler 48-52 650x47mm / 54-58 700x40mm

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance.
• Remove and reinstall or closely inspect both wheel-retention systems. Axles or quick releases should tighten correctly with undamaged threads, hardware and dropouts.

Archived: Headset: FSA Orbit No.1/No.10 EC34/ZS44 · Handlebar: Kona Gravel Dropbar 31.8mm / Width 48 40cm / 50 42cm / 52 44cm / 54 46cm / 56-58 48cm · Stem: Kona 31.8mm / Rise 6º / Length 48 60mm / 50 70mm / 52-54 80mm / 56-58 90mm · Seatpost: Kona w/Offset 27.2mm / 48-52 350mm / 54-58 375mm · Saddle: WTB Volt Medium SL

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
• Check that the seatpost moves for adjustment and that the saddle, post and clamp hold securely without cracks, severe corrosion or damaged hardware.

• Before riding, confirm both wheels are secure, tires are safe, both brakes function, and the headset, handlebar, stem, cranks and pedals have no looseness.
• Begin at low speed. Test steering, braking and shifting progressively, then load the drivetrain and suspension only after the basic safety checks pass.
• Listen and feel for repeated knocks, grinding, skipping, brake pulsation or movement at joints. Stop the test if the bicycle cannot be controlled safely.