Velopedia Bicycle Archive

2009 Kona Humu

Original specifications: Cruiser Mix drivetrain · 26" wheels.

Share owner experience

Planning to sell? Draft your listing

At a glance

Archive #16988
Model year
2009
Category
Cruiser
Original MSRP
$449.00
Sizes
16", 18", 20"
Colors
Bright Blue
In this record
24 specifications · archived image · original MSRP
Model history 4 other years

Browse other years

Compare side by side

Identification clues

2009 archived details

Published colors
Bright Blue
Frame
Kona Chromoly Butted
Original equipment
Cruiser Mix

Clues, not proof of model year. Colors vary and components may have been replaced.

Campaign
Original buildKona Chromoly Butted · Cruiser Mix · 26" wheels

Historical catalog variants

Archived sizes and colors

3 item records

Item-level catalog entries recovered from Velopedia’s original bicycle archive. They document how this model was listed historically; they do not identify the frame size associated with legacy reference geometry or indicate current availability.

Published sizes

16"18"20"

Published colors

Bright Blue
View 3 archived size/color combinations
SizeColor
16"Bright Blue
18"Bright Blue
20"Bright Blue

Historical catalog evidence. Exact specifications and naming may vary by market, production run or manufacturer revision.

Frameset

Frame ConstructionTIG-welded
Frame MaterialKona Chromoly Butted
ForkKona P2
Fork MaterialUnicrown

Drivetrain

Component GroupCruiser Mix
CranksetCY2F-100BT, 42 teeth
Bottom BracketRPM BB-7420
BB Shell Width68mm
CassetteFormula Sprocket
Rear Cogs1-speed, 18 teeth
ChainKMC Z610
PedalsWellgo LU-393

Brakes

BrakesTektro 855-AC brakes, Tektro Retro levers

Cockpit & Contact Points

Headset1 1/8" Ritchey LB-Plus
HandlebarKona Riser
Handlebar ExtensionsNot included
StemKona Control
SaddleVelo
SeatpostKona Thumb

Wheels & Tires

HubsFormula
RimsRigida ZAC-19SL
SpokesStainless, 14ga. (2.0mm)
Front Tire26 x 2.30" Kenda K-Rad
Wheel Size26" wheels

Gearing

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

All published sizes42T · 18T · 1-speed
Ratio2.33:1
Estimated speed At 90 RPM Gear16.6 mph

Uses front tire 26×2.3; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Try your current gearingChanged tires or gears? Calculate your setup.

Your changes apply to this calculation. The archived build stays unchanged.

Your gearing setup
Gears

Use up to three front tooth counts, separated by /. For one rear sprocket, enter the same count twice.

Rear tire

Apply the marking on your rear tire or edit its dimensions below. Older or fractional inch sizes need the ISO marking (e.g. 37-590).

For 32-622, width is 32 mm and rim diameter is 622 mm. Use the rear tire on mixed-wheel bikes. Leave both fields empty to compare ratios only.

Gear, dimension and cadence changes update results automatically.

Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.

Parts & serviceability

Find replacement parts

Original specifications
Front tire · Original
26 x 2.30" Kenda K-Rad
Pedals · Original
Wellgo LU-393
Headset · Original
1 1/8" Ritchey LB-Plus

Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.

Parts and service referenceQuick reference before buying parts

Archived specifications for reference. Check the fitted parts before ordering.

Front tire
26 x 2.30" Kenda K-Rad
Drivetrain
1-speed
Bottom bracket / shell
RPM BB-7420 · 68mm
Campaign
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
0 of 10 checked Progress stays in this browser for this record.

Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.

Full used-bike inspection guide →

Archived: Frame: TIG-welded · Fork: Kona P2 · Unicrown

Archived: Group: Cruiser Mix · Crankset: CY2F-100BT, 42 teeth · Bottom bracket: RPM BB-7420 · Cassette: Formula Sprocket · Rear cogs: 1-speed, 18 teeth · Chain: KMC Z610

Archived: Brakes: Tektro 855-AC brakes, Tektro Retro levers

Archived: Wheel size: 26" wheels · Rims: Rigida ZAC-19SL · Hubs: Formula · Front tire: 26 x 2.30" Kenda K-Rad

Controls and contact points

Archived: Headset: 1 1/8" Ritchey LB-Plus · Handlebar: Kona Riser · Stem: Kona Control · Seatpost: Kona Thumb · Saddle: Velo · Pedals: Wellgo LU-393

My Garage

Velopedia

Enter your email and Velopedia will send a private sign-in link. No password required.

Have you owned this model?Help document firsthand fit, ride and maintenance details that may no longer be available.

This archive record has limited published detail. Share what would help another rider understand how this model fit, rode and held up over time. Velopedia reviews every contribution before publication.

Add fit, maintenance and buyer detailsOptional · five additional fields

Your contribution goes directly to Velopedia’s private review queue. We’ll email an optional confirmation link plus a private edit and withdrawal link, but you do not need to confirm your email before an administrator can review or approve the submission.

Already contributed? Send me a fresh private edit link

For privacy, Velopedia shows the same confirmation whether or not an experience exists.

Checking current listings…

Find this bike on eBay

Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.

Campaign

Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.

Scroll to Top