Uses front tire 700C×38; rear size isn’t listed.
Velopedia Bicycle Archive
2004 Jamis Aragon
Original specifications: Shimano Acera · 8-speed · mechanical rear derailleur · 700c wheels · 29.25 lb published weight.
Planning to sell? Draft your listing
At a glance
Archive #92434- Model year
- 2004
- Category
- Hybrid
- Original MSRP
- $359.95
- Sizes
- 14.5", 16.5", 18.5", 20.5", 22", womens 14.5", womens 17.5"
- Colors
- Royal Blue, Candy Red
- Weight
- 29.25 lb
- Geometry
- Legacy reference
- In this record
- 27 specifications · archived image · original MSRP · geometry
Model history 12 other years
Browse other years
Compare side by side
Identification clues
2004 archived details
- Published colors
- Royal Blue, Candy Red
- Frame
- 6061 T6 aluminum
- Original equipment
- Hybrid Mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original build6061 T6 aluminum · Hybrid Mix · 700c wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | 6061 T6 aluminum |
| Fork | InSync 198, 75mm travel |
| Fork Material | Aluminum/magnesium, single crown |
Drivetrain
| Component Group | Hybrid Mix |
|---|---|
| Shifters | SRAM MRX |
| Front Derailleur | Shimano Tourney TY-32, bottom-pull/clamp-on 31.8mm |
| Rear Derailleur | Shimano Acera |
| Crankset | Cyclone aluminum, 28/38/48 teeth |
| Bottom Bracket | Sealed, 120mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 8-speed, 13 - 34 teeth |
| Chain | KMC UG-50, 1/2 x 3/32" |
| Pedals | Victor VP aluminum |
Brakes
| Brakes | Tektro linear-pull brakes, Tektro Tenera levers |
|---|
Cockpit & Contact Points
| Headset | 1" threaded steel |
|---|---|
| Handlebar | Steel, 1" rise |
| Handlebar Extensions | Not included |
| Stem | Aluminum, adjustable |
| Saddle | Viscount Super Comfort |
| Seatpost | Aluminum, suspension, 27.2mm diameter |
Wheels & Tires
| Hubs | Aluminum, Q/R |
|---|---|
| Rims | Weinmann aluminum, 36-hole |
| Spokes | Stainless steel, 14ga. (2.0mm) straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 700 x 38c Cheng Shin C-1069 |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 571 mm |
| Head-tube angle | 72° |
| Seat-tube angle | 73.5° |
| Chainstay / rear center | 445 mm |
| Wheelbase | 1059 mm |
| Fork offset / rake | 50 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
suspension, 27.2mm diameter

Cane Creek Thudbuster ST Seatpost Black, 27.2mm
Replacement option
Tektro Tenera levers
More parts (1)Fewer parts
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 38c Cheng Shin C-1069
- Drivetrain
- 8-speed
- Seatpost diameter
- 27.2 mm
- Bottom bracket / shell
- Sealed, 120mm spindle · 68mm English
Equipment inspection checks 11 checks based on 6 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: InSync 198, 75mm travel · Aluminum/magnesium, single crown
Suspension
Evaluate the suspension →Archived: Fork: InSync 198, 75mm travel
Drivetrain
Check drivetrain wear →Archived: Group: Hybrid Mix · Shifters: SRAM MRX · Front derailleur: Shimano Tourney TY-32, bottom-pull/clamp-on 31.8mm · Rear derailleur: Shimano Acera · Crankset: Cyclone aluminum, 28/38/48 teeth · Bottom bracket: Sealed, 120mm spindle · Rear cogs: 8-speed, 13 - 34 teeth · Chain: KMC UG-50, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Tektro linear-pull brakes, Tektro Tenera levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Weinmann aluminum, 36-hole · Hubs: Aluminum, Q/R · Front tire: 700 x 38c Cheng Shin C-1069
Controls and contact points
Archived: Headset: 1" threaded steel · Handlebar: Steel, 1" rise · Stem: Aluminum, adjustable · Seatpost: Aluminum, suspension, 27.2mm diameter · Saddle: Viscount Super Comfort · Pedals: Victor VP aluminum
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.




