Uses front tire 700C×38; rear size isn’t listed.
Velopedia Bicycle Archive
2001 Jamis Aragon
Original specifications: Shimano Acera · 7-speed · mechanical rear derailleur · 700c wheels · legacy reference geometry.
Planning to sell? Draft your listing
At a glance
Archive #90592- Model year
- 2001
- Category
- Hybrid
- Original MSRP
- $350.00
- Sizes
- 14.5", 16, 17.5, 19.5, 21.5, 23", womens 17.5"
- Colors
- Black, White
- Geometry
- Legacy reference
- In this record
- 26 specifications · archived image · original MSRP · geometry
Model history 12 other years
Browse other years
Compare side by side
Identification clues
2001 archived details
- Published colors
- Black, White
- Frame
- 6061-T6 aluminum w/replaceable derailleur hanger
- Original equipment
- Hybrid Mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original build6061-T6 aluminum w/replaceable derailleur hanger · Hybrid Mix · 700c wheels
Frameset
| Frame Construction | Brazed/welded |
|---|---|
| Frame Material | 6061-T6 aluminum w/replaceable derailleur hanger |
| Fork | Spinner, 1.95" travel |
| Fork Material | Aluminum/chromoly, triple-clamp crown |
Drivetrain
| Component Group | Hybrid Mix |
|---|---|
| Shifters | SRAM MRX |
| Front Derailleur | Shimano Tourney TY-32, bottom-pull/clamp-on 31.8mm |
| Rear Derailleur | Shimano Acera |
| Crankset | Sakae CS-CR208ABG, 28/38/48 teeth |
| Bottom Bracket | Chin Haur CH-46, 120mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 7-speed, 14 - 34 teeth |
| Chain | KMC UG-50, 1/2 x 3/32" |
| Pedals | Wellgo resin |
Brakes
| Brakes | Tektro linear-pull brakes, Tektro linear-pull levers |
|---|
Cockpit & Contact Points
| Headset | 1" steel |
|---|---|
| Handlebar | High-rise steel |
| Stem | Hsin Lung adjustable |
| Saddle | Viscount |
| Seatpost | Trans X JD-555, 27.2mm diameter |
Wheels & Tires
| Hubs | Aluminum, Q/R |
|---|---|
| Rims | Weinmann, 36-hole |
| Spokes | Xingda stainless steel, 1.8mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 700 x 38c Cheng Shin |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 569 mm |
| Head-tube angle | 71° |
| Seat-tube angle | 73.5° |
| Chainstay / rear center | 431.8 mm |
| Wheelbase | 1049 mm |
| Fork offset / rake | 48.3 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
27.2mm diameter

Race Face Ride XC Seatpost Black, 27.2x375mm
Replacement option
Tektro linear-pull levers
More parts (1)Fewer parts
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 38c Cheng Shin
- Drivetrain
- 7-speed
- Seatpost diameter
- 27.2 mm
- Bottom bracket / shell
- Chin Haur CH-46, 120mm spindle · 68mm English
Equipment inspection checks 11 checks based on 6 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: Brazed/welded · Fork: Spinner, 1.95" travel · Aluminum/chromoly, triple-clamp crown
Suspension
Evaluate the suspension →Archived: Fork: Spinner, 1.95" travel
Drivetrain
Check drivetrain wear →Archived: Group: Hybrid Mix · Shifters: SRAM MRX · Front derailleur: Shimano Tourney TY-32, bottom-pull/clamp-on 31.8mm · Rear derailleur: Shimano Acera · Crankset: Sakae CS-CR208ABG, 28/38/48 teeth · Bottom bracket: Chin Haur CH-46, 120mm spindle · Rear cogs: 7-speed, 14 - 34 teeth · Chain: KMC UG-50, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Tektro linear-pull brakes, Tektro linear-pull levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Weinmann, 36-hole · Hubs: Aluminum, Q/R · Front tire: 700 x 38c Cheng Shin
Controls and contact points
Archived: Headset: 1" steel · Handlebar: High-rise steel · Stem: Hsin Lung adjustable · Seatpost: Trans X JD-555, 27.2mm diameter · Saddle: Viscount · Pedals: Wellgo resin
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.




