Rear tire: 20×1.75.
Velopedia Bicycle Archive
2006 GT Power Series Pro
Original specifications: BMX drivetrain · 20" wheels.
Planning to sell? Draft your listing
At a glance
Archive #11417- Model year
- 2006
- Category
- BMX
- Original MSRP
- $299.99
- Sizes
- 20" wheel
- Colors
- Team Blue/Silver two tone
- In this record
- 23 specifications · archived image · original MSRP
Model history 8 other years
Browse other years
Compare side by side
Identification clues
2006 archived details
- Published colors
- Team Blue/Silver two tone
- Frame
- GT BMX race design, 6061-T6 aluminum
- Original equipment
- BMX
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildGT BMX race design, 6061-T6 aluminum · BMX · 20" wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | GT BMX race design, 6061-T6 aluminum |
| Fork | GT BMX design |
| Fork Material | Cromo/hi-ten |
Drivetrain
| Component Group | BMX |
|---|---|
| Crankset | GT Tubular forged 3pc, 43 teeth |
| Bottom Bracket | Steel, Ball type |
| Rear Cogs | 1-speed, 16 teeth |
| Chain | KMC Z610 |
| Pedals | GT BMX platform design, aluminum body, fixed pins, cr-mo alxe |
Brakes
| Brakes | Alloy side-pull caliper front/Tektro, 924AL, melt forged aluminum rear brakes, Tektro, 319A, aluminum levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" Tange Seiki FATTY 22, extra deep cup engagement |
|---|---|
| Handlebar | GT BMX Race bend, Hi-Ten, 7" rise |
| Stem | '05 GT BMX Race design, cold forged aluminum |
| Saddle | '06 GT BMX "Pro Lite", padded with stitched cover and 7mm rails |
| Seatpost | Aluminum micro-adjust, 27.0mm diameter |
Wheels & Tires
| Hubs | '05 GT BMX branded, aluminum body, sealed mech. Bearings, Cr-Mo axle |
|---|---|
| Rims | Alex G303, aluminum, 36 hole, 31mm width, 36-hole |
| Spokes | 14ga. (2.0mm) Straight Gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 20 x 1.95" Kenda K-Rad |
| Rear Tire | 20 x 1.75" Kenda K-Rad |
| Wheel Size | 20" wheels |
No specifications match. Try a component name or clear your search.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
27.0mm diameter
More parts (1)Fewer parts
aluminum, 36 hole, 31mm width, 36-hole
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- Front: 20 x 1.95" Kenda K-Rad, Rear: 20 x 1.75" Kenda K-Rad
- Drivetrain
- 1-speed
- Seatpost diameter
- 27 mm
- Bottom bracket / shell
- Steel, Ball type
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: GT BMX design · Cromo/hi-ten
Drivetrain
Check drivetrain wear →Archived: Group: BMX · Crankset: GT Tubular forged 3pc, 43 teeth · Bottom bracket: Steel, Ball type · Rear cogs: 1-speed, 16 teeth · Chain: KMC Z610
Brakes
Inspect the brakes →Archived: Brakes: Alloy side-pull caliper front/Tektro, 924AL, melt forged aluminum rear brakes, Tektro, 319A, aluminum levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 20" wheels · Rims: Alex G303, aluminum, 36 hole, 31mm width, 36-hole · Hubs: '05 GT BMX branded, aluminum body, sealed mech. Bearings, Cr-Mo axle · Front tire: Front: 20 x 1.95" Kenda K-Rad, Rear: 20 x 1.75" Kenda K-Rad
Controls and contact points
Archived: Headset: 1 1/8" Tange Seiki FATTY 22, extra deep cup engagement · Handlebar: GT BMX Race bend, Hi-Ten, 7" rise · Stem: '05 GT BMX Race design, cold forged aluminum · Seatpost: Aluminum micro-adjust, 27.0mm diameter · Saddle: '06 GT BMX "Pro Lite", padded with stitched cover and 7mm rails · Pedals: GT BMX platform design, aluminum body, fixed pins, cr-mo alxe
Have you owned this model?Help document firsthand fit, ride and maintenance details that may no longer be available.
This archive record has limited published detail. Share what would help another rider understand how this model fit, rode and held up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.



