Velopedia Bicycle Archive

2011 GT Power Series Pro

Original specifications: BMX Mix drivetrain · 20" wheels.

Share owner experience

At a glance

Archive #25106

Model year: 2011
Category: BMX
Colors: White/blue
In this record: 23 specifications · archived image

Model history 8 other years

Browse other years

Compare side by side

Identification clues

2011 archived details

Published colors: White/blue
Frame: 6061-T6 aluminum
Original equipment: BMX Mix

Clues, not proof of model year. Colors vary and components may have been replaced.

Original build6061-T6 aluminum · BMX Mix · 20" wheels

Historical catalog variants

Archived sizes and colors

1 item record

Item-level catalog entries recovered from Velopedia’s original bicycle archive. They document how this model was listed historically; they do not identify the frame size associated with legacy reference geometry or indicate current availability.

Published colors

White/Blue

View 1 archived size/color combination

Size	Color
—	White/Blue

Historical catalog evidence. Exact specifications and naming may vary by market, production run or manufacturer revision.

Frameset

Frame Construction	Aluminum
Frame Material	6061-T6 aluminum
Fork	GT BMX
Fork Material	Steel

Drivetrain

Component Group	BMX Mix
Crankset	CroMO 3 piece, 43t teeth
Bottom Bracket	Euro
Cassette	Lida
Rear Cogs	16 teeth
Chain	KMC Z510
Pedals	GT BMX platform

Cockpit & Contact Points

Headset	1 1/8" Tange Seiki Fatty 22
Handlebar	GT BMX Race
Handlebar Extensions	Not included
Stem	Cold forged GT drop
Saddle	GT BMX "ProLite"
Seatpost	Aluminum micro-adjust, 27.0mm diameter

Wheels & Tires

Hubs	GT BMX branded
Rims	Jalco ST-32, 36-hole
Spokes	14ga. (2.0mm)
Spoke Nipples	Brass
Front Tire	20 x 1.75" Kenda Small Block 8
Wheel Size	20" wheels

Gearing

Lower gears help on climbs. Higher gears suit higher speeds.

Pedal cadence

RPM

Speed units

RPM = pedal turns per minute.

Published build43T · 16T

Ratio2.69:1

Estimated speed At 90 RPM Gear14.0 mph

Uses front tire 20×1.75; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Try your current gearingChanged tires or gears? Calculate your setup.

Your changes apply to this calculation. The archived build stays unchanged.

Gears Drivetrain

Front teeth Smallest rear teeth Largest rear teeth

Use up to three front tooth counts, separated by /. For one rear sprocket, enter the same count twice.

Rear tire

Rear tire marking

Apply the marking on your rear tire or edit its dimensions below. Older or fractional inch sizes need the ISO marking (e.g. 37-590).

Rim diameter (BSD, mm) Tire width (mm)

For 32-622, width is 32 mm and rim diameter is 622 mm. Use the rear tire on mixed-wheel bikes. Leave both fields empty to compare ratios only.

Cadence (RPM) Speed units

Gear, dimension and cadence changes update results automatically.

Gearing comparison
Measure	Original	Your setup
Lowest ratio	—	—
Highest ratio	—	—
Total range	—	—
Lowest-gear speed	—	—
Highest-gear speed	—	—

Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.

Parts & serviceability

Find replacement parts

Original specifications

Front tire · Original

20 x 1.75" Kenda Small Block 8

Search Amazon Search eBay

Retailer offers

Continental Ride Tour Tire Black, 20x1.75

Replacement option

Competitive Cyclist ↗$52.95

Seatpost · Original

Aluminum micro-adjust

27.0mm diameter

Search Amazon Search eBay

Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.

Parts and service referenceQuick reference before buying parts

Archived specifications for reference. Check the fitted parts before ordering.

Front tire: 20 x 1.75" Kenda Small Block 8
Drivetrain: BMX Mix
Seatpost diameter: 27 mm
Bottom bracket / shell: Euro

Equipment inspection checks 9 checks based on 4 archived component groups Open equipment checksClose equipment checks

Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.

Full used-bike inspection guide →

Frame and fork

Inspect the frame and fork →

Archived: Frame: Aluminum · Fork: GT BMX · Steel

Look for dents or shape changes and inspect the edges of welds around the head tube, bottom bracket, seat cluster and suspension mounts for hairline cracks.
Inspect the fork crown, blades, dropouts and visible steerer area. Check that it is straight, securely installed and free of cracks or impact damage.

Drivetrain

Check drivetrain wear →

Archived: Group: BMX Mix · Crankset: CroMO 3 piece, 43t teeth · Bottom bracket: Euro · Cassette: Lida · Rear cogs: 16 teeth · Chain: KMC Z510

Shift through every available gear under light load. Hesitation, skipping or inconsistent indexing can reflect wear, damage, poor adjustment or mismatched replacement parts.
Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Wheels and tires

Check wheels and tires →

Archived: Wheel size: 20" wheels · Rims: Jalco ST-32, 36-hole · Hubs: GT BMX branded · Front tire: 20 x 1.75" Kenda Small Block 8

Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play.
Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance.

Controls and contact points

Archived: Headset: 1 1/8" Tange Seiki Fatty 22 · Handlebar: GT BMX Race · Stem: Cold forged GT drop · Seatpost: Aluminum micro-adjust, 27.0mm diameter · Saddle: GT BMX "ProLite" · Pedals: GT BMX platform

Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
Check that the seatpost moves for adjustment and that the saddle, post and clamp hold securely without cracks, severe corrosion or damaged hardware.

Have you owned this model?Help document firsthand fit, ride and maintenance details that may no longer be available.

This archive record has limited published detail. Share what would help another rider understand how this model fit, rode and held up over time. Velopedia reviews every contribution before publication.

Display name Required Email address Required · private Ownership Required When or how long you owned it Required Frame size Required Primary type of riding Required Rider height Optional

Overall owner experience Required · at least 120 characters0 of 120 minimum characters Would you own one again? Optional

Add fit, maintenance and buyer detailsOptional · five additional fields

Fit and sizing observations Optional Long-term strengths Optional Problems or recurring maintenance Optional Parts replaced or upgraded Optional What a used buyer should inspect Optional

Your contribution goes directly to Velopedia’s private review queue. We’ll email an optional confirmation link plus a private edit and withdrawal link, but you do not need to confirm your email before an administrator can review or approve the submission.

Already contributed? Send me a fresh private edit link

For privacy, Velopedia shows the same confirmation whether or not an experience exists.

Checking current listings…

Find this bike on eBay

Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.

Search 2011 model Search all years

Campaign

Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.

2011 GT Power Series Pro