Rear tire: 26×2.1.
Velopedia Bicycle Archive
2006 GT Bump
Original specifications: BMX drivetrain · 26" wheels.
Planning to sell? Draft your listing
At a glance
Archive #11306- Model year
- 2006
- Category
- BMX
- Original MSRP
- $269.99
- Sizes
- 20" wheel
- Colors
- RootBeer Brown, Pink
- In this record
- 23 specifications · archived image · original MSRP
Model history 11 other years
Browse other years
Compare side by side
Identification clues
2006 archived details
- Published colors
- RootBeer Brown, Pink
- Frame
- 3-tube chromoly
- Original equipment
- BMX
Clues, not proof of model year. Colors vary and components may have been replaced.
Original build3-tube chromoly · BMX · 26" wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | 3-tube chromoly |
| Fork | '05 GT dirt jump design |
| Fork Material | Chromoly |
Drivetrain
| Component Group | BMX |
|---|---|
| Crankset | GT Tubular Cr-Mo 3pc, 36 teeth |
| Bottom Bracket | Steel, ball type |
| Rear Cogs | 1-speed, 13 teeth |
| Chain | KMC Z410 |
| Pedals | '05 GT Dirt/Street platform design, aluminum body, cr-mo alxe |
Brakes
| Brakes | Alloy side-pull caliper front/Tektro, 907AD, dual anchor bolts, forged aluminum U-brake rear brakes, Tektro, 274A, aluminum levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" Tange Seiki FATTY 22, extra deep cup engagement |
|---|---|
| Handlebar | GT dirt/street bend, Cr-mo, 7" rise |
| Stem | GT Johnson III design, cold forged aluminum |
| Saddle | GT "Star 19" two piece design, 9mm rails |
| Seatpost | Aluminum double bolt micro adjust |
Wheels & Tires
| Hubs | Front: '05 GT branded, aluminum body, sealed Mech. bearings, 3/8" Cr-Mo axle, 36 h, Rear: '05 GT branded, aluminum body, sealed Mech. bearins, 14mm Cr-Mo axle, 36 ho |
|---|---|
| Rims | Alex G22, aluminum, 36 hole, 30mm width, 36-hole |
| Spokes | 14ga. (2.0mm) Straight Gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 26 x 2.20" GT-1453 |
| Rear Tire | 26 X 2.10" GT LP-IV |
| Wheel Size | 26" wheels |
No specifications match. Try a component name or clear your search.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
aluminum, 36 hole, 30mm width, 36-hole
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- Front: 26 x 2.20" GT-1453, Rear: 26 x 2.10" GT LP-IV
- Drivetrain
- 1-speed
- Bottom bracket / shell
- Steel, ball type
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: '05 GT dirt jump design · Chromoly
Drivetrain
Check drivetrain wear →Archived: Group: BMX · Crankset: GT Tubular Cr-Mo 3pc, 36 teeth · Bottom bracket: Steel, ball type · Rear cogs: 1-speed, 13 teeth · Chain: KMC Z410
Brakes
Inspect the brakes →Archived: Brakes: Alloy side-pull caliper front/Tektro, 907AD, dual anchor bolts, forged aluminum U-brake rear brakes, Tektro, 274A, aluminum levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: Alex G22, aluminum, 36 hole, 30mm width, 36-hole · Hubs: Front: '05 GT branded, aluminum body, sealed Mech. bearings, 3/8" Cr-Mo axle, 36 h, Rear: '05 GT branded, aluminum body, sealed Mech. bearins, 14mm Cr-Mo axle, 36 ho · Front tire: Front: 26 x 2.20" GT-1453, Rear: 26 x 2.10" GT LP-IV
Controls and contact points
Archived: Headset: 1 1/8" Tange Seiki FATTY 22, extra deep cup engagement · Handlebar: GT dirt/street bend, Cr-mo, 7" rise · Stem: GT Johnson III design, cold forged aluminum · Seatpost: Aluminum double bolt micro adjust · Saddle: GT "Star 19" two piece design, 9mm rails · Pedals: '05 GT Dirt/Street platform design, aluminum body, cr-mo alxe
Have you owned this model?Help document firsthand fit, ride and maintenance details that may no longer be available.
This archive record has limited published detail. Share what would help another rider understand how this model fit, rode and held up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.



