Uses front tire 20×1.75; rear size isn’t listed.
Velopedia Bicycle Archive
1999 Free Agent Eluder
Original specifications: 20" wheels · 25.7 lb published weight · legacy reference geometry.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #87025- Model year
- 1999
- Category
- BMX
- Original MSRP
- $194.00
- Sizes
- Expert
- Colors
- Chrome-Plated, Lime/Blue, White
- Weight
- 25.7 lb
- Geometry
- Legacy reference
- In this record
- 22 specifications · original MSRP · geometry
Model history 13 other years
Browse other years
Compare side by side
Identification clues
1999 archived details
- Published colors
- Chrome-Plated, Lime/Blue, White
- Frame
- Chromoly main triangle/hi-tensile steel rear stays
- Original equipment
- N/A
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildChromoly main triangle/hi-tensile steel rear stays · 20" wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | Chromoly main triangle/hi-tensile steel rear stays |
| Fork | Spinner |
| Fork Material | Chromoly/hi-tensile steel, unicrown crown |
Drivetrain
| Crankset | 1-piece chromoly 170mm, 44 teeth |
|---|---|
| Bottom Bracket | Victor VPB-35 |
| BB Shell Width | American |
| Rear Cogs | 1-speed, 16 teeth |
| Chain | KMC Z-30, 1/2 x 3/32" |
| Pedals | Xerama SP-102 |
Brakes
| Brakes | Power Tools 1000 rear brakes, Power Tools 1000 rear levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" threadless Tioga TG |
|---|---|
| Handlebar | Free Agent CP |
| Stem | Free Agent aluminum |
| Saddle | Free Agent, kevlar sides |
| Seatpost | Kalloy SP-242, 26.0mm diameter |
Wheels & Tires
| Hubs | Front: Free Agent alloy, Rear: aluminum, nutted |
|---|---|
| Rims | HJC P-GN aluminum, 36-hole |
| Spokes | Shuhn Lih steel, 2.0mm double-butted |
| Spoke Nipples | Brass nipples |
| Front Tire | 20 x 1.75" Free Agent |
| Wheel Size | 20" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 5 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 508 mm |
| Head-tube angle | 74° |
| Seat-tube angle | 72° |
| Chainstay / rear center | 363.2 mm |
| Wheelbase | 906.8 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
1/2 x 3/32"
26.0mm diameter
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 20 x 1.75" Free Agent
- Drivetrain
- 1-speed
- Seatpost diameter
- 26 mm
- Bottom bracket / shell
- Victor VPB-35 · American
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Spinner · Chromoly/hi-tensile steel, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Crankset: 1-piece chromoly 170mm, 44 teeth · Bottom bracket: Victor VPB-35 · Rear cogs: 1-speed, 16 teeth · Chain: KMC Z-30, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Power Tools 1000 rear brakes, Power Tools 1000 rear levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 20" wheels · Rims: HJC P-GN aluminum, 36-hole · Hubs: Front: Free Agent alloy, Rear: aluminum, nutted · Front tire: 20 x 1.75" Free Agent
Controls and contact points
Archived: Headset: 1 1/8" threadless Tioga TG · Handlebar: Free Agent CP · Stem: Free Agent aluminum · Seatpost: Kalloy SP-242, 26.0mm diameter · Saddle: Free Agent, kevlar sides · Pedals: Xerama SP-102
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.

