Uses front tire 20×1.75; rear size isn’t listed.
Velopedia Bicycle Archive
1996 Free Agent Eluder
Original specifications: 20" wheels · legacy reference geometry.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #59921- Model year
- 1996
- Category
- BMX
- Original MSRP
- $199.00
- Sizes
- Boys 10.5"
- Colors
- Black, Chrome-Plated
- Geometry
- Legacy reference
- In this record
- 21 specifications · original MSRP · geometry
Model history 13 other years
Browse other years
Compare side by side
Identification clues
1996 archived details
- Published colors
- Black, Chrome-Plated
- Frame
- Chromoly/hi-tensile steel
- Original equipment
- N/A
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildChromoly/hi-tensile steel · 20" wheels
Frameset
| Frame Construction | TIG-welded steel |
|---|---|
| Frame Material | Chromoly/hi-tensile steel |
| Fork | Spinner |
| Fork Material | Chromoly, unicrown crown |
Drivetrain
| Crankset | 1-piece chromoly 7", 44 teeth |
|---|---|
| Bottom Bracket | Tien Hsin TH-504 |
| BB Shell Width | 68mm Threadless |
| Rear Cogs | 1-speed, 16 teeth |
| Chain | KMC HP-20, 1/2 x 3/32" |
| Pedals | Fasten NW-97F |
Brakes
| Brakes | front/Chang Star 854AG cantilever rear brakes, Chang Star 257A levers |
|---|
Cockpit & Contact Points
| Headset | 1" Tien Hsin TH-404 |
|---|---|
| Handlebar | BMX steel |
| Stem | Free Agent 4-bolt alloy |
| Saddle | Velo VL-229 |
| Seatpost | Kalloy SP-242, 25.6 mm diameter |
Wheels & Tires
| Rims | Weinmann 4019, 36-hole |
|---|---|
| Spokes | Steel, 2.0mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 20 x 1.75" Cheng Shin Comp III type |
| Wheel Size | 20" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 5 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 505 mm |
| Head-tube angle | 74° |
| Seat-tube angle | 72° |
| Chainstay / rear center | 363 mm |
| Wheelbase | 908 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
25.6 mm diameter
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 20 x 1.75" Cheng Shin Comp III type
- Drivetrain
- 1-speed
- Seatpost diameter
- 25.6 mm
- Bottom bracket / shell
- Tien Hsin TH-504 · 68mm Threadless
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded steel · Fork: Spinner · Chromoly, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Crankset: 1-piece chromoly 7", 44 teeth · Bottom bracket: Tien Hsin TH-504 · Rear cogs: 1-speed, 16 teeth · Chain: KMC HP-20, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: front/Chang Star 854AG cantilever rear brakes, Chang Star 257A levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 20" wheels · Rims: Weinmann 4019, 36-hole · Front tire: 20 x 1.75" Cheng Shin Comp III type
Controls and contact points
Archived: Headset: 1" Tien Hsin TH-404 · Handlebar: BMX steel · Stem: Free Agent 4-bolt alloy · Seatpost: Kalloy SP-242, 25.6 mm diameter · Saddle: Velo VL-229 · Pedals: Fasten NW-97F
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.
