2015 Felt F85X

Archived: Frame: Felt Cyclocross FLite Custom Butted aluminum, Dynaform TIG-welded construction, shoulder friendly top tube, BB386, replaceable rear derailleur hanger, internal cable routing · Fork: Felt Cyclocross UHC Advanced carbon fiber blades w/ 160mm post mount disc tabs, ControlTaper 1.125" - 1.5" aluminum steer tube · Carbon Fiber/Aluminum

• Look for dents or shape changes and inspect the edges of welds around the head tube, bottom bracket, seat cluster and suspension mounts for hairline cracks.
• Inspect the fork crown, blades, dropouts and visible steerer area. Check that it is straight, securely installed and free of cracks or impact damage.

Archived: Group: Shimano Tiagra · Shifters: Shimano Tiagra STI · Front derailleur: Shimano Tiagra clamp-on, Ø34.9mm · Rear derailleur: Shimano 10-Speed long cage · Crankset: Shimano Cx50 46/36T 47cm = 165mm 50cm = 170mm 53cm = 172.5mm 55 - 60cm = 175mm · Bottom bracket: FSA BB386 w/ 24mm spindle reducers · Rear cogs: Shimano, 11-32T · Chain: KMC 10-speed

• Shift through every available gear under light load. Hesitation, skipping or inconsistent indexing can reflect wear, damage, poor adjustment or mismatched replacement parts.
• Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: Front Brake: Tektro Mira disc w/ stainless steel 160mm 6-bolt rotor Rear Brake: Tektro Mira disc w/ stainless steel 140mm 6-bolt rotor

• Inspect pads, rotors, calipers and the complete cable or hose path. Both levers should feel consistent and both calipers should release without persistent rubbing.

Archived: Wheel size: 700c · Rims: Felt CxR3 Disc (tubeless ready) · Hubs: Shimano, sealed bearing, 32H, Shimano, sealed bearing, 32H, 10-speed · Front tire: Vittoria Cross XL Pro, 700 x 33c

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance.
• Confirm whether the bike is actually set up tubeless, whether both tires hold pressure, and when sealant and rim tape were last serviced.

Archived: Handlebar: Felt CXR SuperLite, 86mm reach, 130mm drop, Ø31.8mm 47 - 50cm = 420 / 450mm 53 - 60cm = 440 / 470mm · Stem: Felt CXR SuperLite, +/-7° rise, Ø31.8mm 47 - 53cm = 90mm 55cm = 100mm 57cm = 110mm 60cm = 120mm · Seatpost: Felt CxR3, Ø27.2mm, 300mm length · Saddle: Prologo Nago Evo X10

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
• Check that the seatpost moves for adjustment and that the saddle, post and clamp hold securely without cracks, severe corrosion or damaged hardware.