2024 Cannondale Tesoro X 1 StepThru

Archived: Frame: Tesoro X Step-Thru, SmartForm C1 Alloy, removable downtube battery, fully internal cable routing, 135x9mm, belt-compatible dropout, flatmount disc, headtube waterbottle mounts, integrated daytime running light, HDT child seat/cargo mount compatible · Fork: SR Suntour XCR34, 100mm, coil, boost spacing, offset - 44mm (S) / 51mm (M, L)

• Look for dents or shape changes and inspect the edges of welds around the head tube, bottom bracket, seat cluster and suspension mounts for hairline cracks.

Archived: Fork: SR Suntour XCR34, 100mm, coil, boost spacing, offset - 44mm (S) / 51mm (M, L)

• Inspect the fork stanchions for scratches or coating wear, look for oil or dirt rings at the seals, and cycle the fork through its travel while checking for binding or bushing play.
• Ask for dated fork-service records. A clean exterior does not establish the condition of internal seals, oil or bushings.

Archived: Shifters: microSHIFT XLE Xpress Shifter, 11-speed · Rear derailleur: microSHIFT XLE, medium cage · Crankset: Bosch Gen4, 46T · Rear cogs: microSHIFT H-Series, 11-46, 11-speed · Chain: KMC X11, 11-speed

• Shift through every available gear under light load. Hesitation, skipping or inconsistent indexing can reflect wear, damage, poor adjustment or mismatched replacement parts.
• Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: Brakes Riderever Attack-XU, 4-piston hydraulic disc, 203/203 rotors Brake Levers Riderever Attack-XU hydraulic disc

• Squeeze each lever firmly. It should feel consistent and return cleanly. Check levers, hoses and calipers for fluid, inspect pad thickness and contamination, and examine rotors for wear or bending.

Archived: Wheel size: 27.5/29 · Rims: WTB STX i30 TCS, 32h, tubeless ready · Hubs: (F) Shimano MT400, 15x110mm thru-axle / (R) Shimano R600, 32H, QR · Front tire: Maxxis Pace, 29x2.1" 53-584 (M,L), 27.5x2.1" 53-622 (S) · Rear tire: Maxxis Pace 29x2.1" 53-584 (M,L), 27.5x2.1" 53-622 (S)

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance. This record indicates different front and rear wheel diameters, so verify each tire at its correct end.
• Confirm whether the bike is actually set up tubeless, whether both tires hold pressure, and when sealant and rim tape were last serviced.

Archived: Headset: Integrated Sealed Bearing, Tapered, internal cable routing · Handlebar: Cannondale Trekking · Stem: Cannondale 2, 6061 Alloy, 31.8, 70mm, integrated cable routing · Seatpost: Parallelogram Suspension Seatpost, 31.6, 25mm Setback, 50mm Travel, 300mm (SM), 350mm (MD), 400mm (LG) · Saddle: Fizik Vivo Active Ergo

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
• Check that the seatpost moves for adjustment and that the saddle, post and clamp hold securely without cracks, severe corrosion or damaged hardware.

Archived: Cannondale Tesoro X 1 StepThru · electric-assist identification

• Inspect the battery case, mount, lock and electrical contacts for cracks, impact, corrosion, swelling, overheating marks or looseness. Confirm the battery charges normally.
• Confirm the correct charger, battery keys and removable system parts are included. Check charger cables and connectors for damage or improvised repairs.
• Power the system on from cold, check the display for warnings, and test every assist mode. Assistance should engage and stop predictably without intermittent cutouts or abnormal motor noise.
• Ask for available battery-health, cycle-count, diagnostic and firmware records. Confirm that replacement batteries and system support remain available before agreeing on value.