2015 Breezer Repack Team

Archived: 2015 Breezer Repack Team · Mountain Dual Suspension · Published sizes: S, M, L, XL

• Confirm the frame markings and seller description match this archived model. Note every component that differs from the published build.
• Record the frame serial number. It should be legible, unaltered and consistent with the seller’s ownership history.
• Find the size marking on the bicycle and confirm the fit before judging the condition or price.

Archived: Fork: Fox 34 FLOAT 27.5 FIT CTD w/ Trail Adjust, Kashima Coat, 1.5" Taper Steerer, 15QR Axle, Lockout, 160mm Travel

• Inspect the complete frame for cracks, dents, distortion, heavy abrasion, suspicious paint differences or evidence of a previous repair.
• Stand behind and in front of the bicycle to look for obvious frame, fork or wheel misalignment. Ask directly about crashes, transport damage and repairs.

Archived: Fork: Fox 34 FLOAT 27.5 FIT CTD w/ Trail Adjust, Kashima Coat, 1.5" Taper Steerer, 15QR Axle, Lockout, 160mm Travel · Rear shock: Fox FLOAT CTD Boost Valve w/ Trail Adjust, Kashima Coat, 160mm Travel

• Inspect the fork stanchions for scratches or coating wear, look for oil or dirt rings at the seals, and cycle the fork through its travel while checking for binding or bushing play.
• Inspect the shock shaft and seals, cycle the rear suspension through its travel and check for oil, air loss, binding or unusual top-out and bottom-out noises.
• Hold the rear brake and load the suspension from several directions. Check pivots, bearings and mounting hardware for knock, looseness or side play.
• Ask for dated fork, shock and pivot-service records. A clean exterior does not establish the condition of internal seals, oil, bushings or bearings.

Archived: Shifters: Shimano Deore XT 20-Speed, I-Spec · Front derailleur: Shimano Deore XT 10-Speed, Direct Mount · Rear derailleur: Shimano Deore XT 10-Speed, SGS, Shadow Plus Design · Crankset: Shimano Deore XT 10-Speed, Hollowtech II, 38-24T · Bottom bracket: BB92 Press-Fit Bottom Bracket · Rear cogs: Shimano HG-81 10-Speed, 11-36T · Chain: KMC X10

• Shift through every available gear under light load. Hesitation, skipping or inconsistent indexing can reflect wear, damage, poor adjustment or mismatched replacement parts.
• Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: Shimano Deore XT Hydraulic Disc Brake, 180mm Ice-Tech Front, 180mm Ice-Tech Rear

• Squeeze each lever firmly. It should feel consistent and return cleanly. Check levers, hoses and calipers for fluid, inspect pad thickness and contamination, and examine rotors for wear or bending.
• Before riding, test every installed brake separately at walking speed. Each should stop firmly and release cleanly without its control reaching the end of its usable travel.

Archived: Wheel size: 27.5 · Rims: WTB Frequency Race i23 TCS 27.5" Rims (Tubeless-Ready) · Hubs: Shimano Deore XT 15mm Thru-Axle 32H CenterLock Front / Shimano Deore XT 12mm Thru-Axle 32H CenterLock Rear · Front tire: WTB Vigilante, 27.5x2.3" TCS (Tubeless-Ready)

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance.
• Remove and reinstall or closely inspect both wheel-retention systems. Axles or quick releases should tighten correctly with undamaged threads, hardware and dropouts.
• Confirm whether the bike is actually set up tubeless, whether both tires hold pressure, and when sealant and rim tape were last serviced.

Archived: Headset: FSA Orbit 1 1/8"-1 1/2", Fully Integrated, 36° ACB-Sealed, 7.8mm Aluminum Top Cover · Handlebar: Ritchey WCS TRAIL Rizer, 7050 Aluminum, 31.8, 740mm Wide, 20mm Rise, 9° Sweep · Stem: Ritchey WCS TRAIL, 3D-Forged 2014 Aluminum, Stainless Hardware, 31.8, 0°/90° · Seatpost: Rock Shox Reverb Dropper, 125mm, 30.9mm · Saddle: WTB Volt, Ti/Cro Tubular Rail

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
• Cycle the dropper post repeatedly. It should reach full travel, remain extended under load and have no unusual oil, excessive rotational play or damaged remote, cable, hose or battery.

• Before riding, confirm both wheels are secure, tires are safe, both brakes function, and the headset, handlebar, stem, cranks and pedals have no looseness.
• Begin at low speed. Test steering, braking and shifting progressively, then load the drivetrain and suspension only after the basic safety checks pass.
• Listen and feel for repeated knocks, grinding, skipping, brake pulsation or movement at joints. Stop the test if the bicycle cannot be controlled safely.