2015 Breezer Beltway Expert

Archived: 2015 Breezer Beltway Expert · Urban/Commuter · Published sizes: Step-Over: S, M, L, XL

• Confirm the frame markings and seller description match this archived model. Note every component that differs from the published build.
• Record the frame serial number. It should be legible, unaltered and consistent with the seller’s ownership history.
• Find the size marking on the bicycle and confirm the fit before judging the condition or price.

Archived: Fork: Breezer Aluminum Disc, Low-Rider Rack Mounts

• Inspect the complete frame for cracks, dents, distortion, heavy abrasion, suspicious paint differences or evidence of a previous repair.
• Stand behind and in front of the bicycle to look for obvious frame, fork or wheel misalignment. Ask directly about crashes, transport damage and repairs.
• Inspect the fork crown, blades, dropouts and visible steerer area. Check that it is straight, securely installed and free of cracks or impact damage.

Archived: Shifters: Shimano Alfine 8 RapidFire Plus, 8-Speed · Crankset: Breezer Forged Aluminum, 2-Piece Design, Gates CDX CenterTrack Sprocket, 46T · Rear cogs: Gates CDX CenterTrack Sprocket, 22T · Chain: Gates CDX CenterTrack Carbon Drive Belt

• Shift the hub through its complete range using the correct procedure. Check cable or electronic actuation, axle security, hub-shell condition and any sign of lubricant leakage.
• Inspect the belt teeth and edges for damage, verify alignment and tension, and check that any frame split or belt-tensioning hardware is secure.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: Shimano M355 Hydraulic Disc Brake, 160mm Front, 160mm Rear

• Squeeze each lever firmly. It should feel consistent and return cleanly. Check levers, hoses and calipers for fluid, inspect pad thickness and contamination, and examine rotors for wear or bending.
• Before riding, test every installed brake separately at walking speed. Each should stop firmly and release cleanly without its control reaching the end of its usable travel.

Archived: Wheel size: 700c · Rims: Vera DPD22 Rims · Hubs: Shimano RM33 QR Front / Alfine 8 Rear, 32H Centerlock Hubs · Front tire: Continental Sport Contact 700Cx37

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance.
• Remove and reinstall or closely inspect both wheel-retention systems. Axles or quick releases should tighten correctly with undamaged threads, hardware and dropouts.

Archived: Headset: FSA 1 1/8", Fully Integrated, 36° ACB-Sealed, 15mm Aluminum Top Cover · Handlebar: Breezer Ergo Lite 6061 Aluminum, 31.8, 630mm Wide, 15mm Rise, 9° Sweep · Stem: Breezer 3D-Forged 6061 Aluminum, 31.8, 12°/78° · Seatpost: Breezer Aluminum, 27.2mm · Saddle: WTB Silverado Comp · Pedals: Wellgo Aluminum, Chromoly Axle

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
• Check that the seatpost moves for adjustment and that the saddle, post and clamp hold securely without cracks, severe corrosion or damaged hardware.

• Before riding, confirm both wheels are secure, tires are safe, both brakes function, and the headset, handlebar, stem, cranks and pedals have no looseness.
• Begin at low speed. Test steering, braking and shifting progressively, then load the drivetrain and suspension only after the basic safety checks pass.
• Listen and feel for repeated knocks, grinding, skipping, brake pulsation or movement at joints. Stop the test if the bicycle cannot be controlled safely.