2015 Breezer Beltway Elite

Archived: Fork: Breezer Aluminum Disc, Low-Rider Rack Mounts

• Inspect the complete frame for cracks, dents, distortion, heavy abrasion, suspicious paint differences or evidence of a previous repair.
• Inspect the fork crown, blades, dropouts and visible steerer area. Check that it is straight, securely installed and free of cracks or impact damage.

Archived: Shifters: Shimano Alfine 8 RapidFire Plus, 8-Speed · Crankset: Breezer Forged Aluminum, 2-Piece Design, Gates CDX CenterTrack Sprocket, 46T · Bottom bracket: Exterior Bearing System · Rear cogs: Gates CDX CenterTrack Sprocket, 22T · Chain: Gates CDX CenterTrack Carbon Drive Belt

• Shift the hub through its complete range using the correct procedure. Check cable or electronic actuation, axle security, hub-shell condition and any sign of lubricant leakage.
• Inspect the belt teeth and edges for damage, verify alignment and tension, and check that any frame split or belt-tensioning hardware is secure.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: Shimano T447 Trekking Hydraulic Disc Brake, 160mm Front, 160mm Rear

• Squeeze each lever firmly. It should feel consistent and return cleanly. Check levers, hoses and calipers for fluid, inspect pad thickness and contamination, and examine rotors for wear or bending.

Archived: Wheel size: 700c · Rims: Vera DPD22 SSE Rims · Hubs: Shimano 3W Dynamo QR Front / Alfine 8 Rear, 32H Centerlock Hubs · Front tire: Vittoria Randonneur Pro, 700Cx32, Reflective Strip

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance.

Archived: Headset: FSA 1 1/8", Fully Integrated, 36° ACB-Sealed, 15mm Aluminum Top Cover · Handlebar: Breezer Ergo Lite 6061 Aluminum, 31.8, 630mm Wide, 15mm Rise, 9° Sweep · Stem: Breezer 3D-Forged 6061 Aluminum, 31.8, 12°/78° · Seatpost: Breezer Aluminum, 27.2mm · Saddle: WTB Silverado Comp · Pedals: VP, Polished Aluminum Body, Chromoly Axle

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
• Check that the seatpost moves for adjustment and that the saddle, post and clamp hold securely without cracks, severe corrosion or damaged hardware.