Velopedia Bicycle Archive

1993 Wheeler 4400

Original specifications: Shimano Altus A10 Rapidfire Plus drivetrain · 26" wheels · 28.5 lb published weight.

Share owner experience

Planning to sell? Draft your listing

No archive photo is available for this record.

At a glance

Archive #42919
Model year
1993
Category
Mountain
Original MSRP
$489.00
Sizes
14.5, 16, 18, 19.5, 21
Weight
28.5 lb
Geometry
Legacy reference
In this record
20 specifications · original MSRP · geometry
Campaign
Original buildOptima DB chrome-moly · Shimano Altus A10 Rapidfire Plus · 26" wheels

Manufacturer catalog

Published sizes and colors

5 sizes

Manufacturer-published sizes and colors; availability and exact size/color pairings may vary by market or production run.

Published sizes

14.5161819.521

Frameset

Frame ConstructionTIG-welded steel
Frame MaterialOptima DB chrome-moly
ForkResponse Big Fork chrome-moly

Drivetrain

Component GroupShimano Altus A10 Rapidfire Plus
ShiftersShimano Altus A10 Rapidfire Plus
Front DerailleurShimano Altus A10
Rear DerailleurShimano Altus A10
CranksetShimano Altus A10, 26/36/46 teeth
Rear Cogs7-speed, 13 - 30 teeth
ChainKMC HP-70
PedalsWheeler Resin/Steel Cage

Brakes

BrakesShimano Altus A10 brakes, levers

Cockpit & Contact Points

HandlebarWheeler Alloy
StemTIG CroMo Oversize
SaddleWheeler Lite
SeatpostAlloy 300 MM

Wheels & Tires

HubsShimano Exage
RimsAraya VP-20, 36-hole
Front Tire26 x 2.00" Wheeler Mud Master
Wheel Size26" wheels

Geometry

Legacy reference · 6 measurements

Historical measurements. Frame size unknown.

All geometry measurementsLegacy reference · 6 measurements
MeasurementLegacy reference
Top tube566.4 mm
Head-tube angle70.3°
Seat-tube angle73°
Chainstay / rear center434.3 mm
Wheelbase1049 mm
Fork offset / rake38.1 mm

Frame size not recorded.

Gearing

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

All published sizes46/36/26T · 13–30T · 7-speed
Lowest0.87:1 Highest3.54:1 Total range408%
Estimated speed At 90 RPM Lowest gear6.0 mph Highest gear24.6 mph

Uses front tire 26×2; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Try your current gearingChanged tires or gears? Calculate your setup.

Your changes apply to this calculation. The archived build stays unchanged.

Your gearing setup
Gears

Use up to three front tooth counts, separated by /. For one rear sprocket, enter the same count twice.

Rear tire

Apply the marking on your rear tire or edit its dimensions below. Older or fractional inch sizes need the ISO marking (e.g. 37-590).

For 32-622, width is 32 mm and rim diameter is 622 mm. Use the rear tire on mixed-wheel bikes. Leave both fields empty to compare ratios only.

Gear, dimension and cadence changes update results automatically.

Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.

Parts & serviceability

Find replacement parts

Original specifications
Front tire · Original
26 x 2.00" Wheeler Mud Master Replacement search: 26x2 bicycle tire Before ordering: Check rim type and tire clearance.
Crankset · Original
Shimano Altus A10

26/36/46 teeth

Front derailleur · Original
Shimano Altus A10
More parts (3)Fewer parts
Rear derailleur · Original
Shimano Altus A10
Shifters · Original
Shimano Altus A10 Rapidfire Plus
Hubs · Original
Shimano Exage

Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.

Parts and service referenceQuick reference before buying parts

Archived specifications for reference. Check the fitted parts before ordering.

Front tire
26 x 2.00" Wheeler Mud Master
Drivetrain
7-speed
Campaign
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
0 of 10 checked Progress stays in this browser for this record.

Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.

Full used-bike inspection guide →

Archived: Frame: TIG-welded steel · Fork: Response Big Fork chrome-moly

Archived: Group: Shimano Altus A10 Rapidfire Plus · Shifters: Shimano Altus A10 Rapidfire Plus · Front derailleur: Shimano Altus A10 · Rear derailleur: Shimano Altus A10 · Crankset: Shimano Altus A10, 26/36/46 teeth · Rear cogs: 7-speed, 13 - 30 teeth · Chain: KMC HP-70

Archived: Brakes: Shimano Altus A10 brakes, levers

Archived: Wheel size: 26" wheels · Rims: Araya VP-20, 36-hole · Hubs: Shimano Exage · Front tire: 26 x 2.00" Wheeler Mud Master

Controls and contact points

Archived: Handlebar: Wheeler Alloy · Stem: TIG CroMo Oversize · Seatpost: Alloy 300 MM · Saddle: Wheeler Lite · Pedals: Wheeler Resin/Steel Cage

My Garage

Velopedia

Enter your email and Velopedia will send a private sign-in link. No password required.

Have you owned this model?Help preserve its real-world history by sharing your owner experience.

Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.

Add fit, maintenance and buyer detailsOptional · five additional fields

Your contribution goes directly to Velopedia’s private review queue. We’ll email an optional confirmation link plus a private edit and withdrawal link, but you do not need to confirm your email before an administrator can review or approve the submission.

Already contributed? Send me a fresh private edit link

For privacy, Velopedia shows the same confirmation whether or not an experience exists.

Checking current listings…

Find this bike on eBay

Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.

Campaign

Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.

Scroll to Top