Lowest1.00:1
Highest4.00:1
Total range400%
Estimated speed At 90 RPM
Lowest gear
Highest gear
Uses front tire 26×2; rear size isn’t listed.
Velopedia Bicycle Archive
1993 Wheeler 1000
Original specifications: Shimano Altus C10 drivetrain · 26" wheels · 30 lb published weight.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #42419- Model year
- 1993
- Category
- Mountain
- Original MSRP
- $349.00
- Sizes
- 16, 18, 19.5, 21
- Weight
- 30 lb
- Geometry
- Legacy reference
- In this record
- 19 specifications · original MSRP · geometry
Original buildTange chrome-moly · Shimano Altus C10 · 26" wheels
Frameset
| Frame Construction | TIG-welded steel |
|---|---|
| Frame Material | Tange chrome-moly |
| Fork | Unicrown high-tensile steel |
Drivetrain
| Component Group | Shimano Altus C10 |
|---|---|
| Shifters | Shimano Altus C10 Rapidfire Plus |
| Front Derailleur | Shimano Altus C10 |
| Rear Derailleur | Shimano Altus C10 |
| Crankset | Shimano Altus C10, 28/38/48 teeth |
| Rear Cogs | 7-speed, 12 - 28 teeth |
| Chain | V-80 |
| Pedals | Resin with reflector |
Brakes
| Brakes | Shimano Altus C10 brakes, levers |
|---|
Cockpit & Contact Points
| Stem | One piece bar and stem |
|---|---|
| Saddle | Wheeler Gel lite |
| Seatpost | Alloy 300mm |
Wheels & Tires
| Hubs | Shimano Exage |
|---|---|
| Rims | Femco alloy, 36-hole |
| Front Tire | 26 x 2.00" Wheeler Galibier |
| Wheel Size | 26" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Size
Measurement
Measurement
—
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 566.4 mm |
| Head-tube angle | 70.5° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 434.3 mm |
| Wheelbase | 1049 mm |
| Fork offset / rake | 39.9 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
26 x 2.00" Wheeler Galibier
Replacement search: 26x2 bicycle tire Before ordering: Check rim type and tire clearance.
Shimano Altus C10
28/38/48 teeth
Shimano Altus C10
More parts (3)Fewer parts
Shimano Altus C10
Shimano Altus C10 Rapidfire Plus
Shimano Exage
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 26 x 2.00" Wheeler Galibier
- Drivetrain
- 7-speed
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded steel · Fork: Unicrown high-tensile steel
Drivetrain
Check drivetrain wear →Archived: Group: Shimano Altus C10 · Shifters: Shimano Altus C10 Rapidfire Plus · Front derailleur: Shimano Altus C10 · Rear derailleur: Shimano Altus C10 · Crankset: Shimano Altus C10, 28/38/48 teeth · Rear cogs: 7-speed, 12 - 28 teeth · Chain: V-80
Brakes
Inspect the brakes →Archived: Brakes: Shimano Altus C10 brakes, levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: Femco alloy, 36-hole · Hubs: Shimano Exage · Front tire: 26 x 2.00" Wheeler Galibier
Controls and contact points
Archived: Stem: One piece bar and stem · Seatpost: Alloy 300mm · Saddle: Wheeler Gel lite · Pedals: Resin with reflector
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.