2026 Spot Rocker V2 Geared 5-Star AXS

Archived: 2026 Spot Rocker V2 Geared 5-Star AXS · Mountain · Published sizes: S, M, L, XL

• Confirm the frame markings and seller description match this archived model. Note every component that differs from the published build.
• Record the frame serial number. It should be legible, unaltered and consistent with the seller’s ownership history.
• Find the size marking on the bicycle and confirm the fit before judging the condition or price.

Archived: Frame: Spot carbon frame — Rocker’s all-carbon frame · Fork: RockShox SID Ultimate 3P D1 | 35mm stanchions | 120mm travel | Charger Race Day 2 | Debonair+ | 44mm Rake | Boost 15x110

• Inspect the frame in bright light, especially the head tube, bottom-bracket area, chainstays and clamped surfaces. Look for cracks, ripples, crushed sections or signs of impact.
• Stand behind and in front of the bicycle to look for obvious frame, fork or wheel misalignment. Ask directly about crashes, transport damage and repairs.

Archived: Fork: RockShox SID Ultimate 3P D1 | 35mm stanchions | 120mm travel | Charger Race Day 2 | Debonair+ | 44mm Rake | Boost 15x110

• Inspect the fork stanchions for scratches or coating wear, look for oil or dirt rings at the seals, and cycle the fork through its travel while checking for binding or bushing play.
• Ask for dated fork-service records. A clean exterior does not establish the condition of internal seals, oil or bushings.

Archived: Group: SRAM GX AXS Transmission | Wireless | Full Mount | 12-speed · Shifters: SRAM AXS Pod Controller | Wireless | 12-speed · Rear derailleur: SRAM GX AXS Transmission | Wireless | Full Mount | 12-speed · Crankset: SRAM GX Eagle Transmission | B148 DUB | 170mm | 32t · Bottom bracket: SRAM DUB BSA MTB73 · Cassette: SRAM GX Eagle Transmission XG1275 | 12-speed | 10-52t · Chain: SRAM GX Eagle Transmission | Flattop | Silver

• Confirm every shift battery charges and every control operates. Shift through the full cassette under light load while checking pairing, derailleur alignment and response at both ends of the range.
• Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: (F) SRAM Motive Bronze | 4-Piston | 180mm Centerline rotor | 6-Bolt / (R) SRAM Motive Bronze | 4-Piston | 160mm Centerline rotor | 6-Bolt

• Inspect pads and braking surfaces, check the complete cable or hose path, and confirm both controls feel consistent and return cleanly.
• Before riding, test every installed brake separately at walking speed. Each should stop firmly and release cleanly without its control reaching the end of its usable travel.

Archived: Wheel size: 29 · Wheels: (F) DT Swiss | M 1900 SPLINE | 15x110 | 6-Bolt / (R) DT Swiss | M 1900 SPLINE | Tubeless | Boost 12x148 | XD | 6-Bolt · Front tire: 29: Schwalbe Wicked Will 29x2.4 · Rear tire: 29: Schwalbe Racing Ralph 29x2.25

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance.
• Remove and reinstall or closely inspect both wheel-retention systems. Axles or quick releases should tighten correctly with undamaged threads, hardware and dropouts.
• Confirm whether the bike is actually set up tubeless, whether both tires hold pressure, and when sealant and rim tape were last serviced.

Archived: Headset: Cane Creek 50 | ZS44/ZS56 ZS44 upper | ZS56 lower · Handlebar: OneUp Aluminum | 35mm Clamp | 20mm Rise | Sweep: 8 ° Back | 5° Up | Widths: XL: 800mm | LG: 800mm | MD: 780mm | SM: 760mm · Stem: Race Face Turbine SL | 50mm · Seatpost: BikeYoke Revive | Travel: 185mm for XL and Large | 160mm for Medium | 125mm for Small | Diameter: 31.6 · Saddle: SDG Bel-Air V3

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
• Check that the seatpost moves for adjustment and that the saddle, post and clamp hold securely without cracks, severe corrosion or damaged hardware.

• Before riding, confirm both wheels are secure, tires are safe, both brakes function, and the headset, handlebar, stem, cranks and pedals have no looseness.
• Begin at low speed. Test steering, braking and shifting progressively, then load the drivetrain and suspension only after the basic safety checks pass.
• Listen and feel for repeated knocks, grinding, skipping, brake pulsation or movement at joints. Stop the test if the bicycle cannot be controlled safely.