2026 Spot Acme

Archived: 2026 Spot Acme · City/Commuter · Published sizes: 50, 52, 55, 57, 60, Open

• Confirm the frame markings and seller description match this archived model. Note every component that differs from the published build.
• Record the frame serial number. It should be legible, unaltered and consistent with the seller’s ownership history.
• Find the size marking on the bicycle and confirm the fit before judging the condition or price.

Archived: Frame: Spot Custom 7005 Aluminum Frame

• Look for dents or shape changes and inspect the edges of welds around the head tube, bottom bracket, seat cluster and suspension mounts for hairline cracks.
• Stand behind and in front of the bicycle to look for obvious frame, fork or wheel misalignment. Ask directly about crashes, transport damage and repairs.

• Identify the installed brake type and actuation before choosing replacement parts or service procedures. Inspect every installed pad and braking surface, then check the complete cable, hose or linkage path for damage, corrosion, leaks or binding.
• Before riding, test every installed brake separately at walking speed. Each should stop firmly and release cleanly without its control reaching the end of its usable travel.

Archived: Headset: 10-Series, zS56 Bottom, 10, ZS44 Short · Handlebar: Alloy, 31.8mm, 620mm width, 9 deg sweep · Stem: Alloy, 31.8 clamp, +/-6 degree, 50/52cm = 100mm, 55/57cm = 110mm, 60cm = 120mm · Seatpost: Spot black alloy, 27.2mm · Saddle: Spot performance fit, black with grey accent · Pedals: Black body/Black cage

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
• Check that the seatpost moves for adjustment and that the saddle, post and clamp hold securely without cracks, severe corrosion or damaged hardware.

• Spin both wheels and watch for side-to-side or vertical movement. Check rim condition, spoke tension and each hub for roughness or play.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads. Confirm the installed sizes are safe for the rims and available frame and fork clearance.
• Inspect both wheel-retention systems. Axles or quick releases should tighten correctly with undamaged threads, hardware and dropouts.

• Measure chain wear when applicable and inspect the chainring and rear sprockets for hooked, damaged or heavily worn teeth.
• Operate every available gear under light load. Hesitation, skipping or inconsistent engagement can reflect wear, damage, poor adjustment or mismatched parts.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect the crank arms, chainring hardware and pedal threads for damage or looseness.

• Before riding, confirm both wheels are secure, tires are safe, both brakes function, and the headset, handlebar, stem, cranks and pedals have no looseness.
• Begin at low speed. Test steering, braking and shifting progressively, then load the drivetrain and suspension only after the basic safety checks pass.
• Listen and feel for repeated knocks, grinding, skipping, brake pulsation or movement at joints. Stop the test if the bicycle cannot be controlled safely.