Uses front tire 700C×26; rear size isn’t listed.
Velopedia Bicycle Archive
1995 Santana Sovereign
Original specifications: Shimano XTR drivetrain · 700c wheels · 36 lb published weight.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #35055- Model year
- 1995
- Category
- Tandem
- Original MSRP
- $3,595.00
- Sizes
- Custom
- Colors
- Clear anodized, Violet Anodized, Blue Anodized
- Weight
- 36 lb
- Geometry
- Legacy reference
- In this record
- 24 specifications · original MSRP · geometry
Model history 5 other years
Browse other years
Compare side by side
Identification clues
1995 archived details
- Published colors
- Clear anodized, Violet Anodized, Blue Anodized
- Frame
- Easton 7005 Varilite
- Original equipment
- Shimano XTR
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildEaston 7005 Varilite · Shimano XTR · 700c wheels
Frameset
| Frame Construction | Welded aluminum |
|---|---|
| Frame Material | Easton 7005 Varilite |
| Fork | Tange Super Size Tandem |
| Fork Material | Tange Super Size chromoly, unicrown crown |
Drivetrain
| Component Group | Shimano XTR |
|---|---|
| Shifters | Shimano SL-BS50 600 Ultegra bar-end 7-speed |
| Front Derailleur | Shimano XTR, bottom-pull/clamp-on 35.0 mm |
| Rear Derailleur | Shimano XTR |
| Crankset | Shimano Deore XT Prestige Tandem, 28/44/54 teeth |
| Rear Cogs | 8-speed, 12 - 32 teeth |
| Chain | KMC HP-70, 1/2 x 3/32" |
| Pedals | Shimano PD-M535 SPD (clipless) |
Brakes
| Brakes | Shimano Deore XLX Tandem brakes, Dia-Compe Tandem levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/4" Tange-Seiki Aheadset |
|---|---|
| Handlebar | Santana Nitto Tandem |
| Stem | Adjustable Stoker |
| Saddle | Vetta SL |
| Seatpost | Tamer ShockPost Plus, 29.8 mm diameter |
Wheels & Tires
| Hubs | Edco Tandem Cassette, threaded for drum |
|---|---|
| Rims | Araya tandem, 40-hole |
| Spokes | Wheelsmith stainless steel, 2.3mm/2.0mm double butted |
| Spoke Nipples | Brass nipples |
| Front Tire | 700 x 26c Specialized Transition Armadillo |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 555 mm |
| Head-tube angle | 73° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 438 mm |
| Wheelbase | 1711 mm |
| Fork offset / rake | 55 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts

Pirelli P7 Sport Clincher Tire Black, 700x26
700x26c
Replacement option
28/44/54 teeth
More parts (3)Fewer parts
29.8 mm diameter
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 26c Specialized Transition Armadillo
- Drivetrain
- Shimano XTR
- Seatpost diameter
- 29.8 mm
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: Welded aluminum · Fork: Tange Super Size Tandem · Tange Super Size chromoly, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Group: Shimano XTR · Shifters: Shimano SL-BS50 600 Ultegra bar-end 7-speed · Front derailleur: Shimano XTR, bottom-pull/clamp-on 35.0 mm · Rear derailleur: Shimano XTR · Crankset: Shimano Deore XT Prestige Tandem, 28/44/54 teeth · Rear cogs: 8-speed, 12 - 32 teeth · Chain: KMC HP-70, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Shimano Deore XLX Tandem brakes, Dia-Compe Tandem levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Araya tandem, 40-hole · Hubs: Edco Tandem Cassette, threaded for drum · Front tire: 700 x 26c Specialized Transition Armadillo
Controls and contact points
Archived: Headset: 1 1/4" Tange-Seiki Aheadset · Handlebar: Santana Nitto Tandem · Stem: Adjustable Stoker · Seatpost: Tamer ShockPost Plus, 29.8 mm diameter · Saddle: Vetta SL · Pedals: Shimano PD-M535 SPD (clipless)
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.