Lowest0.88:1
Highest4.50:1
Total range514%
Estimated speed At 90 RPM
Lowest gear
Highest gear
Uses front tire 700C×26; rear size isn’t listed.
Velopedia Bicycle Archive
1994 Santana Sovereign
Original specifications: Shimano XTR drivetrain · 700c wheels · 36 lb published weight.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #18042- Model year
- 1994
- Category
- Tandem
- Original MSRP
- $3,595.00
- Sizes
- Captain 53 cm/stoker 50 cm, captain 56 cm/stoker 53 cm, captain 59 cm/stoker 53 cm, captain 62 cm/stoker 56 cm
- Weight
- 36 lb
- Geometry
- Legacy reference
- In this record
- 20 specifications · original MSRP · geometry
Model history 5 other years
Browse other years
Compare side by side
Identification clues
1994 archived details
- Frame
- Easton 7000 double-butted tandem
- Original equipment
- Shimano XTR
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildEaston 7000 double-butted tandem · Shimano XTR · 700c wheels
Frameset
| Frame Construction | Welded aluminum |
|---|---|
| Frame Material | Easton 7000 double-butted tandem |
| Fork | Tange Super Size chromoly unicrown |
Drivetrain
| Component Group | Shimano XTR |
|---|---|
| Shifters | Shimano SL-BS64 600 Ultegra bar-end 8-speed |
| Front Derailleur | Shimano XTR |
| Rear Derailleur | Shimano XTR |
| Crankset | Shimano Deore, 28/44/54 teeth |
| Rear Cogs | 8-speed, 12 - 32 teeth |
| Chain | Shimano HG |
| Pedals | Shimano SPD (clipless) |
Brakes
| Brakes | Shimano canti brakes, levers |
|---|
Cockpit & Contact Points
| Handlebar | Road/drop 44cm |
|---|---|
| Stem | AheadSet chromoly |
| Saddle | Vetta SL |
| Seatpost | Alumax |
Wheels & Tires
| Hubs | Edco Tandem Cassette, threaded for drum |
|---|---|
| Rims | Araya VX-300, 40-hole |
| Front Tire | 700 x 26c Specialized Transition-A |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Size
Measurement
Measurement
—
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 4 measurements
| Measurement | Legacy reference |
|---|---|
| Head-tube angle | 73° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 431.8 mm |
| Fork offset / rake | 55.9 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
700 x 26c Specialized Transition-A
Retailer offers
Pirelli P7 Sport Clincher Tire Black, 700x26
700x26c
Replacement option
Specialized Transition A on eBaySponsored links
Shimano SPD (clipless)
Shimano Deore
28/44/54 teeth
More parts (3)Fewer parts
Shimano XTR
Shimano XTR
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 26c Specialized Transition-A
- Drivetrain
- 8-speed
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: Welded aluminum · Fork: Tange Super Size chromoly unicrown
Drivetrain
Check drivetrain wear →Archived: Group: Shimano XTR · Shifters: Shimano SL-BS64 600 Ultegra bar-end 8-speed · Front derailleur: Shimano XTR · Rear derailleur: Shimano XTR · Crankset: Shimano Deore, 28/44/54 teeth · Rear cogs: 8-speed, 12 - 32 teeth · Chain: Shimano HG
Brakes
Inspect the brakes →Archived: Brakes: Shimano canti brakes, levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Araya VX-300, 40-hole · Hubs: Edco Tandem Cassette, threaded for drum · Front tire: 700 x 26c Specialized Transition-A
Controls and contact points
Archived: Handlebar: Road/drop 44cm · Stem: AheadSet chromoly · Seatpost: Alumax · Saddle: Vetta SL · Pedals: Shimano SPD (clipless)
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.