Lowest2.00:1
Highest4.42:1
Total range221%
Estimated speed At 90 RPM
Lowest gear
Highest gear
Uses front tire 700C×20; rear size isn’t listed.
Velopedia Bicycle Archive
1995 Romic Superace
Original specifications: Shimano Dura-Ace STI drivetrain · 700c wheels · 22 lb published weight.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #34161- Model year
- 1995
- Category
- Road
- Original MSRP
- $2,695.00
- Sizes
- 44 cm, 45 cm, 46 cm, 47 cm, 48 cm, 49 cm, 50 cm, 51 cm, 52 cm, 53 cm, 54 cm, 55 cm, 56 cm, 57 cm, 58 cm, 59 cm, 60 cm, 61 cm, 62 cm, 63 cm, 64 cm, 65 cm, 66 cm, 67 cm, 68 cm, 69 cm, custom, womens custom
- Colors
- Custom
- Weight
- 22 lb
- Geometry
- Legacy reference
- In this record
- 24 specifications · original MSRP · geometry
Original buildReynolds 653 · Shimano Dura-Ace STI · 700c wheels
Frameset
| Frame Construction | Lugged steel |
|---|---|
| Frame Material | Reynolds 653 |
| Fork | Romic |
| Fork Material | Reynolds 653, aero crown |
Drivetrain
| Component Group | Shimano Dura-Ace STI |
|---|---|
| Shifters | Shimano Dura-Ace STI Dual Control |
| Front Derailleur | Shimano Dura-Ace, bottom-pull/clamp-on 28.6 mm |
| Rear Derailleur | Shimano Dura-Ace |
| Crankset | Shimano Dura-Ace, 42/53 teeth |
| Rear Cogs | 8-speed, 12 - 21 teeth |
| Chain | Shimano Dura-Ace/XTR (CN-7401), 1/2 x 3/32" |
| Pedals | Not included |
Brakes
| Brakes | Shimano Dura-Ace Dual Pivot brakes, Shimano Dura-Ace levers |
|---|
Cockpit & Contact Points
| Headset | 1" Shimano Dura-Ace |
|---|---|
| Handlebar | Cinelli 64 |
| Stem | Cinelli 1/A |
| Saddle | Buyer's choice |
| Seatpost | Shimano Dura Ace, 27.0 mm diameter |
Wheels & Tires
| Hubs | Shimano Dura Ace |
|---|---|
| Rims | Campagnolo Lambda Aero, 32-hole |
| Spokes | Wheelsmith stainless steel, 1.8 mm aero |
| Spoke Nipples | Brass nipples |
| Front Tire | 700 x 20c |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Size
Measurement
Measurement
—
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 560 mm |
| Head-tube angle | 73° |
| Seat-tube angle | 74° |
| Chainstay / rear center | 416 mm |
| Wheelbase | 1000 mm |
| Fork offset / rake | 42 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Shimano Dura-Ace/XTR (CN-7401)
1/2 x 3/32"
Retailer offers
SRAM PC-830 Chain One Color, 8 Speed
Replacement option
Shimano CN-7401 on eBaySponsored links
700 x 20c
Replacement search: 700cx20 bicycle tire Before ordering: Check rim type and tire clearance.
Shimano Dura-Ace
42/53 teeth
More parts (6)Fewer parts
Shimano Dura-Ace
Shimano Dura-Ace STI Dual Control
Shimano Dura Ace
27.0 mm diameter
1" Shimano Dura-Ace
Campagnolo Lambda Aero
32-hole
Shimano Dura Ace
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 20c
- Drivetrain
- 8-speed
- Seatpost diameter
- 27 mm
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: Lugged steel · Fork: Romic · Reynolds 653, aero crown
Drivetrain
Check drivetrain wear →Archived: Group: Shimano Dura-Ace STI · Shifters: Shimano Dura-Ace STI Dual Control · Front derailleur: Shimano Dura-Ace, bottom-pull/clamp-on 28.6 mm · Rear derailleur: Shimano Dura-Ace · Crankset: Shimano Dura-Ace, 42/53 teeth · Rear cogs: 8-speed, 12 - 21 teeth · Chain: Shimano Dura-Ace/XTR (CN-7401), 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Shimano Dura-Ace Dual Pivot brakes, Shimano Dura-Ace levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Campagnolo Lambda Aero, 32-hole · Hubs: Shimano Dura Ace · Front tire: 700 x 20c
Controls and contact points
Archived: Headset: 1" Shimano Dura-Ace · Handlebar: Cinelli 64 · Stem: Cinelli 1/A · Seatpost: Shimano Dura Ace, 27.0 mm diameter · Saddle: Buyer's choice · Pedals: Not included
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.