Lowest1.62:1
Highest4.42:1
Total range273%
Estimated speed At 90 RPM
Lowest gear
Highest gear
Uses front tire 700C×23; rear size isn’t listed.
Velopedia Bicycle Archive
1995 Romic Athena Sport
Original specifications: Campagnolo Athena Ergo drivetrain · 700c wheels · 22 lb published weight.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #34157- Model year
- 1995
- Category
- Road
- Original MSRP
- $1,795.00
- Sizes
- 44 cm, 45 cm, 46 cm, 47 cm, 48 cm, 49 cm, 50 cm, 51 cm, 52 cm, 53 cm, 54 cm, 55 cm, 56 cm, 57 cm, 58 cm, 59 cm, 60 cm, 61 cm, 62 cm, 63 cm, 64 cm, 65 cm, 66 cm, 67 cm, 68 cm, 69 cm, custom, womens custom
- Colors
- Custom
- Weight
- 22 lb
- Geometry
- Legacy reference
- In this record
- 24 specifications · original MSRP · geometry
Model history 1 other year
Browse other years
Compare side by side
Identification clues
1995 archived details
- Published colors
- Custom
- Frame
- Reynolds 531
- Original equipment
- Campagnolo Athena Ergo
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildReynolds 531 · Campagnolo Athena Ergo · 700c wheels
Frameset
| Frame Construction | Lugged steel |
|---|---|
| Frame Material | Reynolds 531 |
| Fork | Romic |
| Fork Material | Reynolds 531, semi-sloping crown |
Drivetrain
| Component Group | Campagnolo Athena Ergo |
|---|---|
| Shifters | Campagnolo Athena Ergo |
| Front Derailleur | Campagnolo Athena, bottom-pull/clamp-on 28.6 mm |
| Rear Derailleur | Campagnolo Athena |
| Crankset | Campagnolo Athena, 42/53 teeth |
| Rear Cogs | 8-speed, 12 - 26 teeth |
| Chain | KMC HP-70S, 1/2 X 3/32" |
| Pedals | Not included |
Brakes
| Brakes | Campagnolo Athena (Monoplaner) brakes, Campagnolo Athena levers |
|---|
Cockpit & Contact Points
| Headset | 1" Campagnolo Athena |
|---|---|
| Handlebar | Cinelli 64 |
| Stem | Cinelli 1/A |
| Saddle | Buyer's choice |
| Seatpost | Campagnolo Athena, 27.0 mm diameter |
Wheels & Tires
| Hubs | Campagnolo Athena cassette |
|---|---|
| Rims | Campagnolo Lambda Aero, 32-hole |
| Spokes | Wheelsmith stainless steel, 2.0 mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 700 x 23c Michelin Select |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Size
Measurement
Measurement
—
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 560 mm |
| Head-tube angle | 73° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 420 mm |
| Wheelbase | 1000 mm |
| Fork offset / rake | 51 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
700 x 23c Michelin Select
Retailer offers
Vittoria Rubino Pro G2.0 Clincher Tire Black, 700x23
700x23c
Replacement option
Michelin Select on eBaySponsored links
Campagnolo Athena
42/53 teeth
Campagnolo Athena
27.0 mm diameter
More parts (3)Fewer parts
1" Campagnolo Athena
Campagnolo Lambda Aero
32-hole
Campagnolo Athena cassette
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 23c Michelin Select
- Drivetrain
- 8-speed
- Seatpost diameter
- 27 mm
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: Lugged steel · Fork: Romic · Reynolds 531, semi-sloping crown
Drivetrain
Check drivetrain wear →Archived: Group: Campagnolo Athena Ergo · Shifters: Campagnolo Athena Ergo · Front derailleur: Campagnolo Athena, bottom-pull/clamp-on 28.6 mm · Rear derailleur: Campagnolo Athena · Crankset: Campagnolo Athena, 42/53 teeth · Rear cogs: 8-speed, 12 - 26 teeth · Chain: KMC HP-70S, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Campagnolo Athena (Monoplaner) brakes, Campagnolo Athena levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Campagnolo Lambda Aero, 32-hole · Hubs: Campagnolo Athena cassette · Front tire: 700 x 23c Michelin Select
Controls and contact points
Archived: Headset: 1" Campagnolo Athena · Handlebar: Cinelli 64 · Stem: Cinelli 1/A · Seatpost: Campagnolo Athena, 27.0 mm diameter · Saddle: Buyer's choice · Pedals: Not included
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.