2023 Rocky Mountain Blizzard Carbon 30

Archived: Frame: Rocky Mountain Smoothwall Carbon | 100mm BSA BB | Zero Stack Tapered Headtube | Fully Guided Internal Cable Routing | Dropper Post Compatible | 197mm Dropouts | Sram UDH Compatible Rear Triangle · Fork: Rocky Mountain Carbon Fat · Carbon Fiber

• Inspect the frame in bright light, especially the head tube, bottom-bracket area, chainstays and clamped surfaces. Look for cracks, ripples, crushed sections or signs of impact.
• Inspect the fork crown, blades, dropouts and visible steerer area. Check that it is straight, securely installed and free of cracks or impact damage.

Archived: Shifters: Shimano Deore 12spd · Rear derailleur: Shimano Deore 12spd · Crankset: Race Face Ride Cinch | 30T | 24mm Spindle | Crankarm Length: SM-MD = 170mm | LG - XL = 175mm · Bottom bracket: Race Face BSA 100 24mm · Cassette: SunRace CSMZ603 WA1 11-51T · Chain: Shimano M6100

• Shift through every available gear under light load. Hesitation, skipping or inconsistent indexing can reflect wear, damage, poor adjustment or mismatched replacement parts.
• Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: Shimano MT4100 2 Piston | Resin Pads | F:Shimano RT56 180mm | R:Shimano RT56 180mm

• Inspect pads and braking surfaces, check the complete cable or hose path, and confirm both controls feel consistent and return cleanly.

Archived: Wheel size: 27.5" · Rims: Sun Mulefüt 80 | 32H | Tubeless Ready - Tape / Valves Incl · Hubs: Front: Rocky Mountain Sealed 150 x 15mm; Rear: SUNringlé SRC 197mm

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance.
• Confirm whether the bike is actually set up tubeless, whether both tires hold pressure, and when sealant and rim tape were last serviced.

Archived: Headset: FSA Orbit NO.57E | Sealed 36°x45° Bearings | 30.2mm x 41mm x 7.1mm Upper | 40mm x 51.8mm x 7.5mm Lower | 1.5" Crown Race · Handlebar: Rocky Mountain AM | 780mm Width | 25mm Rise | 9° Backsweep | 5° Upsweep | 35 Clamp · Stem: Rocky Mountain 35 AM | 5° Rise | All Sizes = 40m · Seatpost: Rocky Mountain 30.9mm · Saddle: Rocky Mountain 148 Cromo

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
• Check that the seatpost moves for adjustment and that the saddle, post and clamp hold securely without cracks, severe corrosion or damaged hardware.