Velopedia Bicycle Archive

2009 Raleigh Retro 20

Original specifications: Cruiser Mix drivetrain · 20" wheels.

Share owner experience

At a glance

Archive #18369

Model year: 2009
Category: Cruiser
Original MSRP: $220.00
Sizes: Girls
Colors: Raspberry
In this record: 23 specifications · archived image · original MSRP

Model history 3 other years

Browse other years

Compare side by side

Identification clues

2009 archived details

Published colors: Raspberry
Frame: Hi-tensile steel
Original equipment: Cruiser Mix

Clues, not proof of model year. Colors vary and components may have been replaced.

Original buildHi-tensile steel · Cruiser Mix · 20" wheels

Historical catalog variants

Archived sizes and colors

1 item record

Item-level catalog entries recovered from Velopedia’s original bicycle archive. They document how this model was listed historically; they do not identify the frame size associated with legacy reference geometry or indicate current availability.

Published sizes

girls

Published colors

Raspberry

View 1 archived size/color combination

Size	Color
girls	Raspberry

Historical catalog evidence. Exact specifications and naming may vary by market, production run or manufacturer revision.

Frameset

Frame Construction	TIG-welded
Frame Material	Hi-tensile steel
Fork	Raleigh Cruiser
Fork Material	Hi-tensile steel, unicrown crown

Drivetrain

Component Group	Cruiser Mix
Crankset	Steel, 36 teeth
Bottom Bracket	8pc Loose Ball
Cassette	Cog
Rear Cogs	1-speed, 18 teeth
Chain	KMC Z410, 1/2 x 1/8"
Pedals	Jr Resin platform

Brakes

Brakes	None front/coaster brake rear

Cockpit & Contact Points

Headset	1" threaded steel
Handlebar	Steel Cruiser
Handlebar Extensions	Not included
Stem	Alloy Quill
Saddle	Jr. Cruiser w/Steel Springs
Seatpost	Steel pillar, 25.4mm diameter

Wheels & Tires

Hubs	Front: Steel Nutted, Rear: Steel Nutted Coaster
Rims	Alloy, 36-hole
Spokes	14ga. (2.0mm)
Front Tire	20 x 2.125" Cruiser Whitewall
Wheel Size	20" wheels

Gearing

Lower gears help on climbs. Higher gears suit higher speeds.

Pedal cadence

RPM

Speed units

RPM = pedal turns per minute.

Published build36T · 18T · 1-speed

Ratio2.00:1

Estimated speed At 90 RPM Gear10.8 mph

Uses front tire 20×2.125; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Try your current gearingChanged tires or gears? Calculate your setup.

Your changes apply to this calculation. The archived build stays unchanged.

Gears Drivetrain

Front teeth Smallest rear teeth Largest rear teeth

Use up to three front tooth counts, separated by /. For one rear sprocket, enter the same count twice.

Rear tire

Rear tire marking

Apply the marking on your rear tire or edit its dimensions below. Older or fractional inch sizes need the ISO marking (e.g. 37-590).

Rim diameter (BSD, mm) Tire width (mm)

For 32-622, width is 32 mm and rim diameter is 622 mm. Use the rear tire on mixed-wheel bikes. Leave both fields empty to compare ratios only.

Cadence (RPM) Speed units

Gear, dimension and cadence changes update results automatically.

Gearing comparison
Measure	Original	Your setup
Lowest ratio	—	—
Highest ratio	—	—
Total range	—	—
Lowest-gear speed	—	—
Highest-gear speed	—	—

Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.

Parts & serviceability

Find replacement parts

Original specifications

Front tire · Original

20 x 2.125" Cruiser Whitewall Replacement search: 20x2.125 bicycle tire Before ordering: Check rim type and tire clearance.

Search Amazon Search eBay

Seatpost · Original

Steel pillar

25.4mm diameter

Search Amazon Search eBay

Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.

Parts and service referenceQuick reference before buying parts

Archived specifications for reference. Check the fitted parts before ordering.

Front tire: 20 x 2.125" Cruiser Whitewall
Drivetrain: 1-speed
Seatpost diameter: 25.4 mm
Bottom bracket / shell: 8pc Loose Ball

Have you owned this model?Help document firsthand fit, ride and maintenance details that may no longer be available.

This archive record has limited published detail. Share what would help another rider understand how this model fit, rode and held up over time. Velopedia reviews every contribution before publication.

Display name Required Email address Required · private Ownership Required When or how long you owned it Required Frame size Required Primary type of riding Required Rider height Optional

Overall owner experience Required · at least 120 characters0 of 120 minimum characters Would you own one again? Optional

Add fit, maintenance and buyer detailsOptional · five additional fields

Fit and sizing observations Optional Long-term strengths Optional Problems or recurring maintenance Optional Parts replaced or upgraded Optional What a used buyer should inspect Optional

Your contribution goes directly to Velopedia’s private review queue. We’ll email an optional confirmation link plus a private edit and withdrawal link, but you do not need to confirm your email before an administrator can review or approve the submission.

Already contributed? Send me a fresh private edit link

For privacy, Velopedia shows the same confirmation whether or not an experience exists.

Checking current listings…

Find this bike on eBay

Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.

Search 2009 model Search all years

Campaign

Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.

2009 Raleigh Retro 20