Uses front tire 26×1.95; rear size isn’t listed.
Velopedia Bicycle Archive
2003 Raleigh M40
Original specifications: Shimano Altus · 7-speed · mechanical rear derailleur · 26" wheels · legacy reference geometry.
Planning to sell? Draft your listing
At a glance
Archive #38976- Model year
- 2003
- Category
- Mountain
- Original MSRP
- $279.99
- Sizes
- 14", 16", 16" Womens, 18", 19" Womens, 20", 22"
- Colors
- Blue, Red, Ruby
- Geometry
- Legacy reference
- In this record
- 27 specifications · archived image · original MSRP · geometry
Model history 7 other years
Browse other years
Compare side by side
Identification clues
2003 archived details
- Published colors
- Blue, Red, Ruby
- Frame
- 6061 T6 aluminum
- Original equipment
- Mountain Mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original build6061 T6 aluminum · Mountain Mix · 26" wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | 6061 T6 aluminum |
| Fork | SR Suntour XC50, 63mm travel |
| Fork Material | Aluminum, single crown |
Drivetrain
| Component Group | Mountain Mix |
|---|---|
| Shifters | Shimano EF-29 EZ-Fire |
| Front Derailleur | Shimano C051, top-pull/clamp-on 31.8mm |
| Rear Derailleur | Shimano Altus |
| Crankset | Shimano FC-C051, 28/38/48 teeth |
| Bottom Bracket | Cartridge |
| BB Shell Width | 68mm English |
| Rear Cogs | 7-speed, 13 - 34 teeth |
| Chain | KMC Z51, 1/2 x 3/32" |
| Pedals | Wellgo resin |
Brakes
| Brakes | Tektro 835A Linear Pull brakes, Shimano EF-29 levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" threadless steel |
|---|---|
| Handlebar | Aluminum, 1.25" rise |
| Handlebar Extensions | Not included |
| Stem | Aluminum threadless |
| Saddle | Avenir ATB Vinyl |
| Seatpost | Aluminum, 27.2mm diameter |
Wheels & Tires
| Hubs | Aluminum, Q/R |
|---|---|
| Rims | Weinmann aluminum, 36-hole |
| Spokes | Stainless steel, 14ga. (2.0mm) straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 26 x 1.95" Kenda K-850 |
| Wheel Size | 26" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 584.2 mm |
| Head-tube angle | 71° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 424.2 mm |
| Wheelbase | 1082 mm |
| Fork offset / rake | 40.6 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
27.2mm diameter

Race Face Ride XC Seatpost Black, 27.2x375mm
Replacement option
More parts (3)Fewer parts
Shimano EF-29 levers
28/38/48 teeth
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 26 x 1.95" Kenda K-850
- Drivetrain
- 7-speed
- Seatpost diameter
- 27.2 mm
- Bottom bracket / shell
- Cartridge · 68mm English
Equipment inspection checks 11 checks based on 6 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: SR Suntour XC50, 63mm travel · Aluminum, single crown
Suspension
Evaluate the suspension →Archived: Fork: SR Suntour XC50, 63mm travel
Drivetrain
Check drivetrain wear →Archived: Group: Mountain Mix · Shifters: Shimano EF-29 EZ-Fire · Front derailleur: Shimano C051, top-pull/clamp-on 31.8mm · Rear derailleur: Shimano Altus · Crankset: Shimano FC-C051, 28/38/48 teeth · Bottom bracket: Cartridge · Rear cogs: 7-speed, 13 - 34 teeth · Chain: KMC Z51, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Tektro 835A Linear Pull brakes, Shimano EF-29 levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: Weinmann aluminum, 36-hole · Hubs: Aluminum, Q/R · Front tire: 26 x 1.95" Kenda K-850
Controls and contact points
Archived: Headset: 1 1/8" threadless steel · Handlebar: Aluminum, 1.25" rise · Stem: Aluminum threadless · Seatpost: Aluminum, 27.2mm diameter · Saddle: Avenir ATB Vinyl · Pedals: Wellgo resin
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.





