Uses front tire 700C×38; rear size isn’t listed.
Velopedia Bicycle Archive
2002 Raleigh C200
Original specifications: Hybrid Mix drivetrain · 700c wheels · legacy reference geometry.
Planning to sell? Draft your listing
At a glance
Archive #91289- Model year
- 2002
- Category
- Hybrid
- Original MSRP
- $439.99
- Sizes
- 15", 17", 19", 21", 23", womens 16", womens 19"
- Colors
- White/Silver
- Geometry
- Legacy reference
- In this record
- 27 specifications · archived image · original MSRP · geometry
Model history 7 other years
Browse other years
Compare side by side
Identification clues
2002 archived details
- Published colors
- White/Silver
- Frame
- 7005 aluminum, double-butted
- Original equipment
- Hybrid Mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original build7005 aluminum, double-butted · Hybrid Mix · 700c wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | 7005 aluminum, double-butted |
| Fork | RST CT-Comp 1 TL, 2.0" travel |
| Fork Material | Aluminum, single triple-clamp crown |
Drivetrain
| Component Group | Hybrid Mix |
|---|---|
| Shifters | Shimano Revo |
| Front Derailleur | Shimano C202, dual-pull/clamp-on 31.8mm |
| Rear Derailleur | Shimano C201 Rapid-Rise |
| Crankset | Shimano FC-C203, 28/38/48 teeth |
| Bottom Bracket | Sealed cartridge, 115mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 8-speed, 11 - 34 teeth |
| Chain | KMC Z-82, 1/2 x 3/32" |
| Pedals | Resin, platform |
Brakes
| Brakes | Tektro 836A Linear Pull brakes, Tektro Tenera levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" threadless Tange-Seiki ER |
|---|---|
| Handlebar | Aluminum, 2" rise |
| Handlebar Extensions | Not included |
| Stem | Aluminum, adjustable |
| Saddle | Velo Comfort |
| Seatpost | Aluminum, suspension, 27.2mm diameter |
Wheels & Tires
| Hubs | Joy Tech aluminum, Q/R |
|---|---|
| Rims | Weinmann Zac 19, 36-hole |
| Spokes | Sha-Dar stainless steel, 14ga. (2.0mm) straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 700 x 38c Kenda K-830 |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 571.5 mm |
| Head-tube angle | 71° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 449.6 mm |
| Wheelbase | 1038.9 mm |
| Fork offset / rake | 44.4 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
1/2 x 3/32"

SRAM PC-830 Chain One Color, 8 Speed
Replacement option
suspension, 27.2mm diameter

Cane Creek Thudbuster ST Seatpost Black, 27.2mm
Replacement option
More parts (2)Fewer parts
Tektro Tenera levers
28/38/48 teeth
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 38c Kenda K-830
- Drivetrain
- 8-speed
- Seatpost diameter
- 27.2 mm
- Bottom bracket / shell
- Sealed cartridge, 115mm spindle · 68mm English
Equipment inspection checks 11 checks based on 6 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: RST CT-Comp 1 TL, 2.0" travel · Aluminum, single triple-clamp crown
Suspension
Evaluate the suspension →Archived: Fork: RST CT-Comp 1 TL, 2.0" travel
Drivetrain
Check drivetrain wear →Archived: Group: Hybrid Mix · Shifters: Shimano Revo · Front derailleur: Shimano C202, dual-pull/clamp-on 31.8mm · Rear derailleur: Shimano C201 Rapid-Rise · Crankset: Shimano FC-C203, 28/38/48 teeth · Bottom bracket: Sealed cartridge, 115mm spindle · Rear cogs: 8-speed, 11 - 34 teeth · Chain: KMC Z-82, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Tektro 836A Linear Pull brakes, Tektro Tenera levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Weinmann Zac 19, 36-hole · Hubs: Joy Tech aluminum, Q/R · Front tire: 700 x 38c Kenda K-830
Controls and contact points
Archived: Headset: 1 1/8" threadless Tange-Seiki ER · Handlebar: Aluminum, 2" rise · Stem: Aluminum, adjustable · Seatpost: Aluminum, suspension, 27.2mm diameter · Saddle: Velo Comfort · Pedals: Resin, platform
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.





