Uses front tire 700C×38; rear size isn’t listed.
Velopedia Bicycle Archive
1999 Raleigh C30
Original specifications: Hybrid Mix drivetrain · 700c wheels · 30.5 lb published weight.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #89598- Model year
- 1999
- Category
- Hybrid
- Original MSRP
- $269.99
- Sizes
- 15", 17", 19", 21", 23", womens 16", womens 19"
- Colors
- Blackened Green, Cherrywood
- Weight
- 30.5 lb
- Geometry
- Legacy reference
- In this record
- 27 specifications · original MSRP · geometry
Model history 10 other years
Browse other years
Compare side by side
Identification clues
1999 archived details
- Published colors
- Blackened Green, Cherrywood
- Frame
- Chromoly seat tube/hi-tensile steel
- Original equipment
- Hybrid Mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildChromoly seat tube/hi-tensile steel · Hybrid Mix · 700c wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | Chromoly seat tube/hi-tensile steel |
| Fork | Raleigh |
| Fork Material | Chromoly/hi-tensile steel, unicrown crown |
Drivetrain
| Component Group | Hybrid Mix |
|---|---|
| Shifters | Shimano Revo TY-40 |
| Front Derailleur | Shimano AceraX top-swing, bottom-pull/clamp-on 28.6mm |
| Rear Derailleur | Shimano AceraX |
| Crankset | Shimano AceraX, 24/34/42 teeth |
| Bottom Bracket | Victor VPB-33, 117.5mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 7-speed, 11 - 28 teeth |
| Chain | KMC Z-51, 1/2 x 3/32" |
| Pedals | Wellgo LU-983 |
Brakes
| Brakes | ProMax linear-pull brakes, ProMax alloy levers |
|---|
Cockpit & Contact Points
| Headset | 1" Victor VP-H67 |
|---|---|
| Handlebar | Steel |
| Handlebar Extensions | Not included |
| Stem | Steel |
| Saddle | Selle Stratos Hyper Expert Duo-Compound Lycra Comfort |
| Seatpost | Aluminum micro-adjust, 26.0mm diameter |
Wheels & Tires
| Hubs | Joy Tech OS aluminum, Q/R |
|---|---|
| Rims | Weinmann 519, 36-hole |
| Spokes | Chung Nan stainless steel, 2.0mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 700 x 38c Kenda K-830 |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 571.5 mm |
| Head-tube angle | 71° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 431.8 mm |
| Wheelbase | 1038.9 mm |
| Fork offset / rake | 40.6 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
ProMax alloy levers
More parts (3)Fewer parts
24/34/42 teeth
26.0mm diameter
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 38c Kenda K-830
- Drivetrain
- 7-speed
- Seatpost diameter
- 26 mm
- Bottom bracket / shell
- Victor VPB-33, 117.5mm spindle · 68mm English
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Raleigh · Chromoly/hi-tensile steel, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Group: Hybrid Mix · Shifters: Shimano Revo TY-40 · Front derailleur: Shimano AceraX top-swing, bottom-pull/clamp-on 28.6mm · Rear derailleur: Shimano AceraX · Crankset: Shimano AceraX, 24/34/42 teeth · Bottom bracket: Victor VPB-33, 117.5mm spindle · Rear cogs: 7-speed, 11 - 28 teeth · Chain: KMC Z-51, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: ProMax linear-pull brakes, ProMax alloy levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Weinmann 519, 36-hole · Hubs: Joy Tech OS aluminum, Q/R · Front tire: 700 x 38c Kenda K-830
Controls and contact points
Archived: Headset: 1" Victor VP-H67 · Handlebar: Steel · Stem: Steel · Seatpost: Aluminum micro-adjust, 26.0mm diameter · Saddle: Selle Stratos Hyper Expert Duo-Compound Lycra Comfort · Pedals: Wellgo LU-983
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.


