Velopedia Bicycle Archive

1998 Norco Stikine

Original specifications: Hybrid Mix drivetrain · 700c wheels.

Share owner experience

Planning to sell? Draft your listing

No archive photo is available for this record.

At a glance

Archive #76024
Model year
1998
Category
Hybrid
Original MSRP
$289.00
Sizes
16", 18", 20", 22", womens 16", womens 18", womens 20", womens 22"
Colors
Ink Blue
In this record
26 specifications · original MSRP
Original buildHi-tensile steel · Hybrid Mix · 700c wheels

Manufacturer catalog

Published sizes and colors

8 sizes · 1 color

Manufacturer-published sizes and colors; availability and exact size/color pairings may vary by market or production run.

Published sizes

16"18"20"22"womens 16"womens 18"womens 20"womens 22"

Published colors

Ink Blue

Frameset

Frame ConstructionTIG-welded
Frame MaterialHi-tensile steel
ForkNorco
Fork MaterialHi-tensile steel, unicrown crown

Drivetrain

Component GroupHybrid Mix
ShiftersShimano Altus EZ Fire Plus
Front DerailleurShimano Tourney TY-32
Rear DerailleurShimano AceraX
CranksetShimano Tourney TY-30, 28/36/48 teeth
Bottom BracketThree piece, sealed
Rear Cogs7-speed, 14 - 28 teeth
ChainKMC UG-50, 1/2 x 3/32"
PedalsVictor 893

Brakes

BrakesTektro 990 brakes, Tektro 371 levers

Cockpit & Contact Points

Headset1" steel
HandlebarSteel, rise
Handlebar ExtensionsNot included
StemHi-rise
SaddleVelo
SeatpostSteel

Wheels & Tires

HubsSteel, Q/R
RimsAluminum, 36-hole
SpokesSteel, 2.0mm straight gauge
Spoke NipplesBrass nipples
Front Tire700 x 38c Kenda K-180
Wheel Size700c wheels

Gearing

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

Published build48/36/28T · 14–28T · 7-speed
Lowest1.00:1 Highest3.43:1 Total range343%
Estimated speed At 90 RPM Lowest gear7.4 mph Highest gear25.2 mph

Uses front tire 700C×38; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Try your current gearingChanged tires or gears? Calculate your setup.

Your changes apply to this calculation. The archived build stays unchanged.

Your gearing setup
Gears

Use up to three front tooth counts, separated by /. For one rear sprocket, enter the same count twice.

Rear tire

Apply the marking on your rear tire or edit its dimensions below. Older or fractional inch sizes need the ISO marking (e.g. 37-590).

For 32-622, width is 32 mm and rim diameter is 622 mm. Use the rear tire on mixed-wheel bikes. Leave both fields empty to compare ratios only.

Gear, dimension and cadence changes update results automatically.

Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.

Parts & serviceability

Find replacement parts

Original specifications

Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.

Front tire · Original
700 x 38c Kenda K-180 Replacement search: 700cx38 bicycle tire Before ordering: Check rim type and tire clearance.
Crankset · Original
Shimano Tourney TY-30

28/36/48 teeth

Front derailleur · Original
Shimano Tourney TY-32
More parts (1)Fewer parts
Shifters · Original
Shimano Altus EZ Fire Plus

Based on the original build. Check fit and installed parts before ordering.

Parts and service referenceQuick reference before buying parts

Archived specifications for reference. Check the fitted parts before ordering.

Front tire
700 x 38c Kenda K-180
Drivetrain
7-speed
Bottom bracket / shell
Three piece, sealed
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
0 of 10 checked Progress stays in this browser for this record.

Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.

Full used-bike inspection guide →

Archived: Frame: TIG-welded · Fork: Norco · Hi-tensile steel, unicrown crown

Archived: Group: Hybrid Mix · Shifters: Shimano Altus EZ Fire Plus · Front derailleur: Shimano Tourney TY-32 · Rear derailleur: Shimano AceraX · Crankset: Shimano Tourney TY-30, 28/36/48 teeth · Bottom bracket: Three piece, sealed · Rear cogs: 7-speed, 14 - 28 teeth · Chain: KMC UG-50, 1/2 x 3/32"

Archived: Brakes: Tektro 990 brakes, Tektro 371 levers

Archived: Wheel size: 700c wheels · Rims: Aluminum, 36-hole · Hubs: Steel, Q/R · Front tire: 700 x 38c Kenda K-180

Controls and contact points

Archived: Headset: 1" steel · Handlebar: Steel, rise · Stem: Hi-rise · Seatpost: Steel · Saddle: Velo · Pedals: Victor 893

My Garage

Velopedia

Enter your email and Velopedia will send a private sign-in link. No password required.

Have you owned this model?Help document firsthand fit, ride and maintenance details that may no longer be available.

This archive record has limited published detail. Share what would help another rider understand how this model fit, rode and held up over time. Velopedia reviews every contribution before publication.

Add fit, maintenance and buyer detailsOptional · five additional fields

Your contribution goes directly to Velopedia’s private review queue. We’ll email an optional confirmation link plus a private edit and withdrawal link, but you do not need to confirm your email before an administrator can review or approve the submission.

Already contributed? Send me a fresh private edit link

For privacy, Velopedia shows the same confirmation whether or not an experience exists.

No recent price sample is available for this bike. Check eBay for matching listings.

Find this bike on eBay

Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.

Scroll to Top