Uses front tire 26×2.1; rear size isn’t listed.
Velopedia Bicycle Archive
2000 Mongoose DX 10.7
Original specifications: Shimano XTR · 9-speed · mechanical rear derailleur · 26" wheels · legacy reference geometry.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #45840- Model year
- 2000
- Category
- Mountain
- Original MSRP
- $2,499.99
- Sizes
- 14", 16", 18", 20"
- Colors
- Bead Blasted
- Geometry
- Legacy reference
- In this record
- 25 specifications · original MSRP · geometry
Model history 1 other year
Browse other years
Compare side by side
Identification clues
2000 archived details
- Published colors
- Bead Blasted
- Frame
- 3Al/2.5V titanium
- Original equipment
- Mountain Mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original build3Al/2.5V titanium · Mountain Mix · 26" wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | 3Al/2.5V titanium |
| Fork | Answer Manitou MARS, 3.15" travel |
| Fork Material | Aluminum/magnesium, triple-clamp crown |
Drivetrain
| Component Group | Mountain Mix |
|---|---|
| Shifters | Shimano Deore LX |
| Front Derailleur | Shimano Deore LX |
| Rear Derailleur | Shimano XTR SGS |
| Crankset | Shimano Deore XT, 22/32/44 teeth |
| Rear Cogs | 9-speed, 11 - 32 teeth |
| Chain | Shimano CN-HG72, 1/2 x 3/32" |
| Pedals | Time ATAC Alium |
Brakes
| Brakes | Avid Arch Rival 50 brakes, Avid SD-2.0 L levers |
|---|
Cockpit & Contact Points
| Headset | Cane Creek C2 |
|---|---|
| Handlebar | Titec Hell Bent XC |
| Handlebar Extensions | Not included |
| Stem | Titec Big AL |
| Saddle | SDG Comp Belair |
| Seatpost | Titec AL-235, 27.2mm diameter |
Wheels & Tires
| Hubs | Mavic Crossride |
|---|---|
| Rims | Mavic Crossride, 26-hole/28-hole |
| Spokes | Mavic |
| Spoke Nipples | Alloy nipples |
| Front Tire | 26 x 2.10" IRC Notos XC |
| Wheel Size | 26" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 4 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 585 mm |
| Head-tube angle | 71° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 430 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
27.2mm diameter
More parts (7)Fewer parts
22/32/44 teeth
Based on the original build. Check fit and installed parts before ordering.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 26 x 2.10" IRC Notos XC
- Drivetrain
- 9-speed
- Seatpost diameter
- 27.2 mm
Equipment inspection checks 11 checks based on 6 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Answer Manitou MARS, 3.15" travel · Aluminum/magnesium, triple-clamp crown
Suspension
Evaluate the suspension →Archived: Fork: Answer Manitou MARS, 3.15" travel
Drivetrain
Check drivetrain wear →Archived: Group: Mountain Mix · Shifters: Shimano Deore LX · Front derailleur: Shimano Deore LX · Rear derailleur: Shimano XTR SGS · Crankset: Shimano Deore XT, 22/32/44 teeth · Rear cogs: 9-speed, 11 - 32 teeth · Chain: Shimano CN-HG72, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Avid Arch Rival 50 brakes, Avid SD-2.0 L levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: Mavic Crossride, 26-hole/28-hole · Hubs: Mavic Crossride · Front tire: 26 x 2.10" IRC Notos XC
Controls and contact points
Archived: Headset: Cane Creek C2 · Handlebar: Titec Hell Bent XC · Stem: Titec Big AL · Seatpost: Titec AL-235, 27.2mm diameter · Saddle: SDG Comp Belair · Pedals: Time ATAC Alium
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.

