Lowest1.00:1
Highest3.69:1
Total range369%
Estimated speed At 90 RPM
Lowest gear
Highest gear
Uses front tire 26×1.95; rear size isn’t listed.
Velopedia Bicycle Archive
2000 Scorpio At-100X
Original specifications: Shimano Tourney · 7-speed · mechanical rear derailleur · 26" wheels · 31.5 lb published weight.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #90010- Model year
- 2000
- Category
- Mountain
- Original MSRP
- $200.00
- Sizes
- 16", 18", 20", 22"
- Colors
- Plush Plum
- Weight
- 31.5 lb
- In this record
- 27 specifications · original MSRP
Original buildHi-tensile steel · Mountain Mix · 26" wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | Hi-tensile steel |
| Fork | Pilot FX shock, 2.0" travel |
| Fork Material | Hi-tensile steel, triple-clamp crown |
Drivetrain
| Component Group | Mountain Mix |
|---|---|
| Shifters | SRAM MRX IBS |
| Front Derailleur | Pilot DX, bottom-pull/clamp-on 28.6mm |
| Rear Derailleur | Shimano Tourney TY-22 |
| Crankset | 3-piece steel, 28/38/48 teeth |
| Bottom Bracket | Three piece, sealed, 110mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 7-speed, 13 - 28 teeth |
| Chain | KMC Z-51, 1/2 x 3/32" |
| Pedals | Resin |
Brakes
| Brakes | Lee Chi ProMax linear-pull brakes, Lee Chi ProMax levers |
|---|
Cockpit & Contact Points
| Headset | 1" steel |
|---|---|
| Handlebar | Steel |
| Handlebar Extensions | Not included |
| Stem | Steel |
| Saddle | Pilot |
| Seatpost | Steel, 26.4mm diameter |
Wheels & Tires
| Hubs | Front: steel, Q/R, Rear: steel, nutted |
|---|---|
| Rims | Alex X-101, 36-hole |
| Spokes | Shuhn Lih UCP, 2.0mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 26 x 1.95" Kenda K-847 |
| Wheel Size | 26" wheels |
No specifications match. Try a component name or clear your search.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
26 x 1.95" Kenda K-847
Replacement search: 26x1.95 bicycle tire Before ordering: Check rim type and tire clearance.
Lee Chi ProMax linear-pull brakes
Lee Chi ProMax levers
More parts (3)Fewer parts
Shimano Tourney TY-22
Steel
26.4mm diameter
Alex X-101
36-hole
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 26 x 1.95" Kenda K-847
- Drivetrain
- 7-speed
- Seatpost diameter
- 26.4 mm
- Bottom bracket / shell
- Three piece, sealed, 110mm spindle · 68mm English
Equipment inspection checks 11 checks based on 6 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Pilot FX shock, 2.0" travel · Hi-tensile steel, triple-clamp crown
Suspension
Evaluate the suspension →Archived: Fork: Pilot FX shock, 2.0" travel
Drivetrain
Check drivetrain wear →Archived: Group: Mountain Mix · Shifters: SRAM MRX IBS · Front derailleur: Pilot DX, bottom-pull/clamp-on 28.6mm · Rear derailleur: Shimano Tourney TY-22 · Crankset: 3-piece steel, 28/38/48 teeth · Bottom bracket: Three piece, sealed, 110mm spindle · Rear cogs: 7-speed, 13 - 28 teeth · Chain: KMC Z-51, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Lee Chi ProMax linear-pull brakes, Lee Chi ProMax levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: Alex X-101, 36-hole · Hubs: Front: steel, Q/R, Rear: steel, nutted · Front tire: 26 x 1.95" Kenda K-847
Controls and contact points
Archived: Headset: 1" steel · Handlebar: Steel · Stem: Steel · Seatpost: Steel, 26.4mm diameter · Saddle: Pilot · Pedals: Resin
Have you owned this model?Help document firsthand fit, ride and maintenance details that may no longer be available.
This archive record has limited published detail. Share what would help another rider understand how this model fit, rode and held up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.