2024 Marin Coast Trail 20" 1

Archived: 2024 Marin Coast Trail 20" 1 · Kids · Published sizes: One Size

• Confirm the frame markings and seller description match this archived model. Note every component that differs from the published build.
• Record the frame serial number. It should be legible, unaltered and consistent with the seller’s ownership history.
• Find the size marking on the bicycle and confirm the fit before judging the condition or price.

Archived: Frame: Series 1 Lightweight Aluminum, Low Standover, 20” Wheels, Single Speed, Rim Brake · Fork: Series 1 Aluminum , Rim brake · Aluminum

• Look for dents or shape changes and inspect the edges of welds around the head tube, bottom bracket, seat cluster and suspension mounts for hairline cracks.
• Stand behind and in front of the bicycle to look for obvious frame, fork or wheel misalignment. Ask directly about crashes, transport damage and repairs.
• Inspect the fork crown, blades, dropouts and visible steerer area. Check that it is straight, securely installed and free of cracks or impact damage.

Archived: Crankset: Forged Alloy, 34T, 140mm, Ring Guard · Bottom bracket: Sealed Cartridge Bearings, Square Taper · Cassette: Single Speed Freewheel, 16T · Chain: KMC 1-Speed

• Check chain tension and chainline, rotate the drivetrain through a full revolution and confirm the rear axle or tensioning hardware cannot slip.
• Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: (F) Linear Pull, Alloy / (R) Linear Pull, Alloy; Levers: Kid's Specific Short Reach Alloy Lever

• Inspect pads, cables and housings, then examine both rim braking surfaces for concavity, cracking or heavy wear. Confirm each caliper returns and centers correctly.
• Before riding, test every installed brake separately at walking speed. Each should stop firmly and release cleanly without its control reaching the end of its usable travel.

Archived: Wheel size: 20" · Rims: Aluminum, CNC Brake Surface · Hubs: (F) Forged Aluminum Alloy, 28H / (R) Forged Aluminum Alloy, 28H · Front tire: Marin X Vee Tire Co. Speedster, 20x2.0” · Rear tire: Marin X Vee Tire Co. Speedster, 20x2.0”

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance.
• Remove and reinstall or closely inspect both wheel-retention systems. Axles or quick releases should tighten correctly with undamaged threads, hardware and dropouts.

Archived: Headset: Threadless · Handlebar: Marin Riser, 50mm Rise, 580mm Width, 19mm OD Grip Section · Stem: Alloy, 40mm · Seatpost: Aluminum, 27.2mm, Integrated Saddle/Post · Saddle: Marin 20" Integrated Saddle/Post · Pedals: Kids Specific Nylon Pedal

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
• Check that the seatpost moves for adjustment and that the saddle, post and clamp hold securely without cracks, severe corrosion or damaged hardware.

• Before riding, confirm both wheels are secure, tires are safe, both brakes function, and the headset, handlebar, stem, cranks and pedals have no looseness.
• Begin at low speed. Test steering, braking and shifting progressively, then load the drivetrain and suspension only after the basic safety checks pass.
• Listen and feel for repeated knocks, grinding, skipping, brake pulsation or movement at joints. Stop the test if the bicycle cannot be controlled safely.