Uses front tire 700C×35; rear size isn’t listed.
Velopedia Bicycle Archive
2000 Marin San Rafael
Original specifications: Shimano Alivio · 8-speed · mechanical rear derailleur · 700c wheels · legacy reference geometry.
Planning to sell? Draft your listing
At a glance
Archive #46479- Model year
- 2000
- Category
- City & Commuter
- Original MSRP
- $449.00
- Sizes
- 13.5", 15.5", 17.5", 19", 20.5", womens 15", womens 17"
- Colors
- Denim, Gray
- Geometry
- Legacy reference
- In this record
- 25 specifications · archived image · original MSRP · geometry
Model history 15 other years
Browse other years
Compare side by side
Identification clues
2000 archived details
- Published colors
- Denim, Gray
- Frame
- Ovation chromoly, double butted
- Original equipment
- Hybrid Mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildOvation chromoly, double butted · Hybrid Mix · 700c wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | Ovation chromoly, double butted |
| Fork | In-Sync 160 |
| Fork Material | Aluminum, triple-clamp crown |
Drivetrain
| Component Group | Hybrid Mix |
|---|---|
| Shifters | Shimano Alivio RapidFire Plus |
| Front Derailleur | Shimano Deore |
| Rear Derailleur | Shimano Alivio |
| Crankset | Cyclone 335NP, 28/38/48 teeth |
| Bottom Bracket | Sealed cartridge |
| Rear Cogs | 8-speed, 11 - 30 teeth |
| Chain | Shimano CN-UG50, 1/2 x 3/32" |
| Pedals | Resin body/aluminum cage w/clips & straps |
Brakes
| Brakes | Linear-pull brakes, aluminum linear-pull levers |
|---|
Cockpit & Contact Points
| Headset | Vp |
|---|---|
| Handlebar | Alloy riser |
| Handlebar Extensions | Not included |
| Stem | Alloy |
| Saddle | Marin Comfort DLX |
| Seatpost | Post Moderne suspension, 27.0mm diameter |
Wheels & Tires
| Hubs | Alloy |
|---|---|
| Rims | Alloy, 36-hole |
| Spokes | Stainless steel, 2.0mm straight gauge |
| Front Tire | 700 x 35c Cross-Terrain |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 5 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 552.4 mm |
| Head-tube angle | 71° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 439.4 mm |
| Wheelbase | 1057.3 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
1/2 x 3/32"

SRAM PC-830 Chain One Color, 8 Speed
Replacement option
aluminum linear-pull levers
More parts (4)Fewer parts
27.0mm diameter
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 35c Cross-Terrain
- Drivetrain
- 8-speed
- Seatpost diameter
- 27 mm
- Bottom bracket / shell
- Sealed cartridge
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: In-Sync 160 · Aluminum, triple-clamp crown
Drivetrain
Check drivetrain wear →Archived: Group: Hybrid Mix · Shifters: Shimano Alivio RapidFire Plus · Front derailleur: Shimano Deore · Rear derailleur: Shimano Alivio · Crankset: Cyclone 335NP, 28/38/48 teeth · Bottom bracket: Sealed cartridge · Rear cogs: 8-speed, 11 - 30 teeth · Chain: Shimano CN-UG50, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Linear-pull brakes, aluminum linear-pull levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Alloy, 36-hole · Hubs: Alloy · Front tire: 700 x 35c Cross-Terrain
Controls and contact points
Archived: Headset: VP · Handlebar: Alloy riser · Stem: Alloy · Seatpost: Post Moderne suspension, 27.0mm diameter · Saddle: Marin Comfort DLX · Pedals: Resin body/aluminum cage w/clips & straps
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.



