2026 Jamis Faultline A2 MPX

Archived: 2026 Jamis Faultline A2 MPX · Mountain · Published sizes: S/15.5″, M/17″, L/19″, XL/21″

• Confirm the frame markings and seller description match this archived model. Note every component that differs from the published build.
• Record the frame serial number. It should be legible, unaltered and consistent with the seller’s ownership history.
• Find the size marking on the bicycle and confirm the fit before judging the condition or price.

Archived: Frame: Triple-butted 6061 alloy, 125mm suspension travel, 1.5 – 1 1/8” tapered head tube,12x148mm thru-axle dropout, internal dropper post routing, ISCG05 chainguide mount, Rock Shox Deluxe Select+ RT, UDH derailleur hanger · Fork: Rock Shox Psylo Gold RC, 3-position compression, external rebound, 35mm stanchions, 15x110mm axle, 130mm travel

• Look for dents or shape changes and inspect the edges of welds around the head tube, bottom bracket, seat cluster and suspension mounts for hairline cracks.
• Stand behind and in front of the bicycle to look for obvious frame, fork or wheel misalignment. Ask directly about crashes, transport damage and repairs.

Archived: Fork: Rock Shox Psylo Gold RC, 3-position compression, external rebound, 35mm stanchions, 15x110mm axle, 130mm travel

• Inspect the fork stanchions for scratches or coating wear, look for oil or dirt rings at the seals, and cycle the fork through its travel while checking for binding or bushing play.
• Ask for dated fork-service records. A clean exterior does not establish the condition of internal seals, oil or bushings.

Archived: Group: Shimano Deore, 12-speed · Shifters: Shimano Deore, 1×12-speed · Rear derailleur: Shimano Deore, 12-speed · Crankset: Shimano Deore, 32T, 170mm · Bottom bracket: Shimano · Cassette: Shiamno Deore, 12-speed, 11-51T · Chain: KMC X12, 12-speed

• Shift through every available gear under light load. Hesitation, skipping or inconsistent indexing can reflect wear, damage, poor adjustment or mismatched replacement parts.
• Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: TRP Slate EVO 4-piston hydraulic disc, 180mm rotors

• Squeeze each lever firmly. It should feel consistent and return cleanly. Check levers, hoses and calipers for fluid, inspect pad thickness and contamination, and examine rotors for wear or bending.
• Before riding, test every installed brake separately at walking speed. Each should stop firmly and release cleanly without its control reaching the end of its usable travel.

Archived: Wheel size: 29 · Wheels: Stan’s No Tubes Flow D rims, Novatec D041SB 15x110mm front & D462SB 12x148mm rear hubs, stainless spokes · Front tire: Vittoria Agarro 29×2.4″ Trail · Rear tire: Vittoria Agarro 29×2.4″ Trail

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance.
• Remove and reinstall or closely inspect both wheel-retention systems. Axles or quick releases should tighten correctly with undamaged threads, hardware and dropouts.

Archived: Headset: FSA Orbit 1.5 Zero-Stack internal cup, 8mm cone spacer · Handlebar: Race Face Ride, 35 x 760mm · Stem: Race Face Ride , 35 x 50mm · Seatpost: KS Vantage Adjustable Travel Dropper 110-140mm travel Length: (S), 140-170mm travel Length: (M/L), 170-200mm travel Length: (XL), Westy 2.0 remote · Saddle: WTB Volt

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
• Cycle the dropper post repeatedly. It should reach full travel, remain extended under load and have no unusual oil, excessive rotational play or damaged remote, cable, hose or battery.

• Before riding, confirm both wheels are secure, tires are safe, both brakes function, and the headset, handlebar, stem, cranks and pedals have no looseness.
• Begin at low speed. Test steering, braking and shifting progressively, then load the drivetrain and suspension only after the basic safety checks pass.
• Listen and feel for repeated knocks, grinding, skipping, brake pulsation or movement at joints. Stop the test if the bicycle cannot be controlled safely.