Uses front tire 700C×38; rear size isn’t listed.
Velopedia Bicycle Archive
2003 Jamis Tangier
Original specifications: Hybrid Mix drivetrain · 700c wheels · 27.75 lb published weight.
Planning to sell? Draft your listing
At a glance
Archive #30485- Model year
- 2003
- Category
- Hybrid
- Original MSRP
- $599.95
- Sizes
- 14.5", 16.5", 18.5", 20.5", 22"
- Colors
- Pewter
- Weight
- 27.75 lb
- Geometry
- Legacy reference
- In this record
- 27 specifications · archived image · original MSRP · geometry
Model history 13 other years
Browse other years
Compare side by side
Identification clues
2003 archived details
- Published colors
- Pewter
- Frame
- 6061 T6 aluminum
- Original equipment
- Hybrid Mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original build6061 T6 aluminum · Hybrid Mix · 700c wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | 6061 T6 aluminum |
| Fork | Answer Manitou Luxe Elite, 50mm travel |
| Fork Material | Aluminum/magnesium, single crown |
Drivetrain
| Component Group | Hybrid Mix |
|---|---|
| Shifters | SRAM 7.0 |
| Front Derailleur | Shimano Deore, bottom-pull/clamp-on 31.8mm |
| Rear Derailleur | SRAM ESP 7.0 |
| Crankset | Shimano Deore, 26/36/48 teeth |
| Bottom Bracket | Shimano BB-UN40, 110mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 8-speed, 11 - 32 teeth |
| Chain | KMC Z72, 1/2 x 3/32" |
| Pedals | Victor VP aluminum |
Brakes
| Brakes | Tektro linear-pull brakes, SRAM Two-Axis levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" integrated VP |
|---|---|
| Handlebar | Aluminum, 1.25" rise |
| Handlebar Extensions | Not included |
| Stem | Aluminum, adjustable |
| Saddle | Selle Royal Look-In |
| Seatpost | Aluminum, suspension, 27.2mm diameter |
Wheels & Tires
| Hubs | Ritchey |
|---|---|
| Rims | Front: Ritchey Girder Comp, Rear: Ritchey OCR Comp, 36-hole |
| Spokes | Stainless steel, 14ga. (2.0mm) straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 700 x 38c Cheng Shin C-1069 |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 571 mm |
| Head-tube angle | 72° |
| Seat-tube angle | 73.5° |
| Chainstay / rear center | 445 mm |
| Wheelbase | 1059 mm |
| Fork offset / rake | 38.1 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
1/2 x 3/32"

SRAM PC-830 Chain One Color, 8 Speed
Replacement option
suspension, 27.2mm diameter

Cane Creek Thudbuster ST Seatpost Black, 27.2mm
Replacement option
More parts (4)Fewer parts
SRAM Two-Axis levers
110mm spindle
26/36/48 teeth
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 38c Cheng Shin C-1069
- Drivetrain
- 8-speed
- Seatpost diameter
- 27.2 mm
- Bottom bracket / shell
- Shimano BB-UN40, 110mm spindle · 68mm English
Equipment inspection checks 11 checks based on 6 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Answer Manitou Luxe Elite, 50mm travel · Aluminum/magnesium, single crown
Suspension
Evaluate the suspension →Archived: Fork: Answer Manitou Luxe Elite, 50mm travel
Drivetrain
Check drivetrain wear →Archived: Group: Hybrid Mix · Shifters: SRAM 7.0 · Front derailleur: Shimano Deore, bottom-pull/clamp-on 31.8mm · Rear derailleur: SRAM ESP 7.0 · Crankset: Shimano Deore, 26/36/48 teeth · Bottom bracket: Shimano BB-UN40, 110mm spindle · Rear cogs: 8-speed, 11 - 32 teeth · Chain: KMC Z72, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Tektro linear-pull brakes, SRAM Two-Axis levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Front: Ritchey Girder Comp, Rear: Ritchey OCR Comp, 36-hole · Hubs: Ritchey · Front tire: 700 x 38c Cheng Shin C-1069
Controls and contact points
Archived: Headset: 1 1/8" integrated VP · Handlebar: Aluminum, 1.25" rise · Stem: Aluminum, adjustable · Seatpost: Aluminum, suspension, 27.2mm diameter · Saddle: Selle Royal Look-In · Pedals: Victor VP aluminum
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.





