Rear tire: 20×1.75.
Velopedia Bicycle Archive
2006 GT Power Series XL
Original specifications: BMX drivetrain · 20" wheels.
Planning to sell? Draft your listing
At a glance
Archive #11419- Model year
- 2006
- Category
- BMX
- Original MSRP
- $499.99
- Sizes
- 20" wheel
- Colors
- Team Blue/Silver two tone
- In this record
- 23 specifications · archived image · original MSRP
Model history 7 other years
Browse other years
Compare side by side
Identification clues
2006 archived details
- Published colors
- Team Blue/Silver two tone
- Frame
- 6061 T6 aluminum
- Original equipment
- BMX
Clues, not proof of model year. Colors vary and components may have been replaced.
Original build6061 T6 aluminum · BMX · 20" wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | 6061 T6 aluminum |
| Fork | GT BMX design |
| Fork Material | Aluminum/chromoly |
Drivetrain
| Component Group | BMX |
|---|---|
| Crankset | Truvativ 180mm "Racing XR", 44 teeth |
| Bottom Bracket | TruVativ GIGA pipe DH |
| Rear Cogs | 1-speed, 16 teeth |
| Chain | KMC Z610HX |
| Pedals | GT BMX platform design, aluminum body, thread in pins, cr-mo alxe |
Brakes
| Brakes | Alloy side-pull caliper front/Tektro, 930AL, cold forged aluminum rear brakes, Tektro, 319, aluminum levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" Semi integrated |
|---|---|
| Handlebar | GT BMX Race bend, Cr-mo, 7.9" rise |
| Stem | '05 GT BMX Race design, cold forged aluminum |
| Saddle | '06 GT BMX "Pro Lite", padded with stitched cover and 7mm rails |
| Seatpost | GT design, aluminum micro adjust, 27.0mm diameter |
Wheels & Tires
| Hubs | '05 GT BMX branded, aluminum body, Sealed Bearings, Hollow Cr-Mo axle |
|---|---|
| Rims | Sun Rhyno Lite XL, double wall aluminum with eyelets, 29mm width |
| Spokes | 14ga. (2.0mm) Straight Gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 20 x 1.95" Kenda K-Rad |
| Rear Tire | 20 x 1.75" Kenda K-Rad |
| Wheel Size | 20" wheels |
No specifications match. Try a component name or clear your search.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
aluminum micro adjust, 27.0mm diameter
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- Front: 20 x 1.95" Kenda K-Rad, Rear: 20 x 1.75" Kenda K-Rad
- Drivetrain
- 1-speed
- Seatpost diameter
- 27 mm
- Bottom bracket / shell
- TruVativ GIGA pipe DH
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: GT BMX design · Aluminum/chromoly
Drivetrain
Check drivetrain wear →Archived: Group: BMX · Crankset: Truvativ 180mm "Racing XR", 44 teeth · Bottom bracket: TruVativ GIGA pipe DH · Rear cogs: 1-speed, 16 teeth · Chain: KMC Z610HX
Brakes
Inspect the brakes →Archived: Brakes: Alloy side-pull caliper front/Tektro, 930AL, cold forged aluminum rear brakes, Tektro, 319, aluminum levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 20" wheels · Rims: Sun Rhyno Lite XL, double wall aluminum with eyelets, 29mm width · Hubs: '05 GT BMX branded, aluminum body, Sealed Bearings, Hollow Cr-Mo axle · Front tire: Front: 20 x 1.95" Kenda K-Rad, Rear: 20 x 1.75" Kenda K-Rad
Controls and contact points
Archived: Headset: 1 1/8" Semi integrated · Handlebar: GT BMX Race bend, Cr-mo, 7.9" rise · Stem: '05 GT BMX Race design, cold forged aluminum · Seatpost: GT design, aluminum micro adjust, 27.0mm diameter · Saddle: '06 GT BMX "Pro Lite", padded with stitched cover and 7mm rails · Pedals: GT BMX platform design, aluminum body, thread in pins, cr-mo alxe
Have you owned this model?Help document firsthand fit, ride and maintenance details that may no longer be available.
This archive record has limited published detail. Share what would help another rider understand how this model fit, rode and held up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.



