2015 Felt F65X

Archived: 2015 Felt F65X · Cyclocross/Gravel · Published sizes: 47, 50, 53, 55, 57, 60cm

• Confirm the frame markings and seller description match this archived model. Note every component that differs from the published build.
• Record the frame serial number. It should be legible, unaltered and consistent with the seller’s ownership history.
• Find the size marking on the bicycle and confirm the fit before judging the condition or price.

Archived: Frame: Felt Cyclocross FLite Custom Butted aluminum, Dynaform TIG-welded construction, shoulder friendly top tube, BB386, replaceable rear derailleur hanger, internal cable routing · Fork: Felt Cyclocross UHC Advanced carbon fiber blades w/ 160mm post mount disc tabs, ControlTaper 1.125" - 1.5" aluminum steer tube · Carbon Fiber/Aluminum

• Look for dents or shape changes and inspect the edges of welds around the head tube, bottom bracket, seat cluster and suspension mounts for hairline cracks.
• Stand behind and in front of the bicycle to look for obvious frame, fork or wheel misalignment. Ask directly about crashes, transport damage and repairs.
• Inspect the fork crown, blades, dropouts and visible steerer area. Check that it is straight, securely installed and free of cracks or impact damage.

Archived: Group: Shimano 105 mix · Shifters: Shimano 105 11-speed STI · Front derailleur: Shimano 105 11-speed clamp-on, Ø34.9mm · Rear derailleur: Shimano 105 11-speed short cage · Crankset: FSA Gossamer 46/36T BB386 47cm = 165mm 50cm = 170mm 53cm = 172.5mm 55 - 60cm = 175mm · Bottom bracket: FSA BB386 · Rear cogs: Shimano 105, 11-28T · Chain: Shimano 105 11-speed

• Shift through every available gear under light load. Hesitation, skipping or inconsistent indexing can reflect wear, damage, poor adjustment or mismatched replacement parts.
• Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: Front Brake: TRP Spyre-C disc w/ stainless steel 160mm 6-bolt rotor Rear Brake: TRP Spyre-C disc w/ stainless steel 140mm 6-bolt rotor

• Inspect pads, rotors, calipers and the complete cable or hose path. Both levers should feel consistent and both calipers should release without persistent rubbing.
• Before riding, test every installed brake separately at walking speed. Each should stop firmly and release cleanly without its control reaching the end of its usable travel.

Archived: Wheel size: 700c · Rims: Felt CxR3 Disc (tubeless ready) · Hubs: Felt R3 Disc, sealed bearing, 24H, Felt R3 Disc, sealed cartridge bearing, 28H, 11-speed · Front tire: Vittoria Cross XL Pro, 700 x 33c

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance.
• Remove and reinstall or closely inspect both wheel-retention systems. Axles or quick releases should tighten correctly with undamaged threads, hardware and dropouts.
• Confirm whether the bike is actually set up tubeless, whether both tires hold pressure, and when sealant and rim tape were last serviced.

Archived: Handlebar: Felt CXR SuperLite, 86mm reach, 130mm drop, Ø31.8mm 47 - 50cm = 420 / 450mm 53 - 60cm = 440 / 470mm · Stem: Felt CXR SuperLite, +/-7° rise, Ø31.8mm 47 - 53cm = 90mm 55cm = 100mm 57cm = 110mm 60cm = 120mm · Seatpost: Felt CxR3, Ø27.2mm, 300mm length · Saddle: Prologo Nago Evo X10 T2.0

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
• Check that the seatpost moves for adjustment and that the saddle, post and clamp hold securely without cracks, severe corrosion or damaged hardware.

• Before riding, confirm both wheels are secure, tires are safe, both brakes function, and the headset, handlebar, stem, cranks and pedals have no looseness.
• Begin at low speed. Test steering, braking and shifting progressively, then load the drivetrain and suspension only after the basic safety checks pass.
• Listen and feel for repeated knocks, grinding, skipping, brake pulsation or movement at joints. Stop the test if the bicycle cannot be controlled safely.