Rear tire: 700C×28.
Velopedia Bicycle Archive
1995 Easy Racer Gold Rush Replica
Original specifications: Front: 20", Rear: 700c wheels · 27 lb published weight · legacy reference geometry.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #33014- Model year
- 1995
- Category
- Recumbent
- Original MSRP
- $2,500.00
- Sizes
- S, M, L
- Colors
- Polished
- Weight
- 27 lb
- Geometry
- Legacy reference
- In this record
- 23 specifications · original MSRP · geometry
Model history 2 other years
Browse other years
Compare side by side
Identification clues
1995 archived details
- Published colors
- Polished
- Frame
- 6061 T6 aluminum
Clues, not proof of model year. Colors vary and components may have been replaced.
Original build6061 T6 aluminum · Front: 20", Rear: 700c wheels
Frameset
| Frame Construction | Welded aluminum |
|---|---|
| Frame Material | 6061 T6 aluminum |
| Fork | Spinner |
| Fork Material | Chromoly, forged dropouts, unicrown crown |
Drivetrain
| Shifters | Shimano SL-BS50 600 Ultegra bar-end 7-speed |
|---|---|
| Front Derailleur | Suntour XC Pro, bottom-pull/clamp-on 28.6 mm |
| Rear Derailleur | Shimano Deore LX |
| Crankset | Suntour XC Pro, 24/46/52 teeth |
| Rear Cogs | 7-speed, 12 - 28 teeth |
| Chain | Sachs SC-M55, 1/2 x 3/32" |
| Pedals | SR/Suntour Low-Fat MTP-127 w/ resin clips & straps |
Brakes
| Brakes | Shimano 105SC Dual Pivot brakes, Systeme MTB 3-finger levers |
|---|
Cockpit & Contact Points
| Headset | 1" Shimano 600 Ultegra |
|---|---|
| Handlebar | Ape Hanger recumbent alloy |
| Stem | SR 5355 stainless |
| Saddle | Custom |
Wheels & Tires
| Hubs | Shimano 105SC |
|---|---|
| Rims | Sun Metal CR-16, 36-hole |
| Spokes | Wheelsmith stainless steel, 2.0 mm double butted |
| Spoke Nipples | Alloy nipples |
| Front Tire | 20 x 1 1/8" IRC Roadlite EX |
| Rear Tire | 700 x 28c Cyclepro Discovery |
| Wheel Size | Front: 20", Rear: 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 3 measurements
| Measurement | Legacy reference |
|---|---|
| Head-tube angle | 59° |
| Wheelbase | 1676.4 mm |
| Fork offset / rake | 69.8 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Affiliate links may earn Velopedia a commission.
More parts (1)Fewer parts
Based on the original build. Check fit and installed parts before ordering.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- Front: 20 x 1 1/8" IRC Roadlite EX, Rear: 700 x 28c Cyclepro Discovery
- Drivetrain
- 7-speed
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: Welded aluminum · Fork: Spinner · Chromoly, forged dropouts, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Shifters: Shimano SL-BS50 600 Ultegra bar-end 7-speed · Front derailleur: Suntour XC Pro, bottom-pull/clamp-on 28.6 mm · Rear derailleur: Shimano Deore LX · Crankset: Suntour XC Pro, 24/46/52 teeth · Rear cogs: 7-speed, 12 - 28 teeth · Chain: Sachs SC-M55, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Shimano 105SC Dual Pivot brakes, Systeme MTB 3-finger levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: Front: 20", Rear: 700c wheels · Rims: Sun Metal CR-16, 36-hole · Hubs: Shimano 105SC · Front tire: Front: 20 x 1 1/8" IRC Roadlite EX, Rear: 700 x 28c Cyclepro Discovery
Controls and contact points
Archived: Headset: 1" Shimano 600 Ultegra · Handlebar: Ape Hanger recumbent alloy · Stem: SR 5355 stainless · Saddle: Custom · Pedals: SR/Suntour Low-Fat MTP-127 w/ resin clips & straps
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.