Velopedia Bicycle Archive
1995 Easy Racer EZ-1
Original specifications: Shimano Altus C50 drivetrain · Front: 16", Rear: 20" wheels · 29 lb published weight.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #33013- Model year
- 1995
- Category
- Recumbent
- Original MSRP
- $795.00
- Sizes
- Medium-large, small-medium
- Colors
- Red, Yellow
- Weight
- 29 lb
- Geometry
- Legacy reference
- In this record
- 24 specifications · original MSRP · geometry
Model history 2 other years
Browse other years
Compare side by side
Identification clues
1995 archived details
- Published colors
- Red, Yellow
- Frame
- Chromoly / hi-tensile steel
- Original equipment
- Shimano Altus C50
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildChromoly / hi-tensile steel · Shimano Altus C50 · Front: 16", Rear: 20" wheels
Frameset
| Frame Construction | TIG-welded steel |
|---|---|
| Frame Material | Chromoly / hi-tensile steel |
| Fork | Easy Racer EZ-1 |
| Fork Material | Hi-tensile steel, unicrown crown |
Drivetrain
| Component Group | Shimano Altus C50 |
|---|---|
| Shifters | Shimano Tourney TY20 top-mount |
| Front Derailleur | Shimano Tourney TY-20, bottom-pull/clamp-on 28.6 mm |
| Rear Derailleur | Shimano Altus C50 |
| Crankset | Sugino SX, 30/46/52 teeth |
| Rear Cogs | 6-speed, 13 - 30 teeth |
| Chain | KMC Alpha 50, 1/2 x 3/32" |
| Pedals | Victor Hi-Impact resin, toe-clip attachable |
Brakes
| Brakes | Dia-Compe FXE brakes, Suntour XC Sport levers |
|---|
Cockpit & Contact Points
| Headset | 1" YST 200 |
|---|---|
| Handlebar | 6061 T6 aluminum |
| Stem | SR CYS 50 |
| Saddle | Easy Racer Recliner-custom |
Wheels & Tires
| Hubs | Sovos sealed mechanism |
|---|---|
| Rims | Alesa 319K , 36-hole |
| Spokes | 2.0 mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 16" Kenda |
| Rear Tire | 20 x 1 3/8" Kenda |
| Wheel Size | Front: 16", Rear: 20" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 3 measurements
| Measurement | Legacy reference |
|---|---|
| Head-tube angle | 63.5° |
| Wheelbase | 1346.2 mm |
| Fork offset / rake | 50.8 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
Speed unavailable: wheel or tire size is missing or unclear.
Add your rear tire size to calculate speedHow it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Affiliate links may earn Velopedia a commission.
Based on the original build. Check fit and installed parts before ordering.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- Front: 16" Kenda, Rear: 20 x 1 3/8" Kenda
- Drivetrain
- 6-speed
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded steel · Fork: Easy Racer EZ-1 · Hi-tensile steel, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Group: Shimano Altus C50 · Shifters: Shimano Tourney TY20 top-mount · Front derailleur: Shimano Tourney TY-20, bottom-pull/clamp-on 28.6 mm · Rear derailleur: Shimano Altus C50 · Crankset: Sugino SX, 30/46/52 teeth · Rear cogs: 6-speed, 13 - 30 teeth · Chain: KMC Alpha 50, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Dia-Compe FXE brakes, Suntour XC Sport levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: Front: 16", Rear: 20" wheels · Rims: Alesa 319K , 36-hole · Hubs: Sovos sealed mechanism · Front tire: Front: 16" Kenda, Rear: 20 x 1 3/8" Kenda
Controls and contact points
Archived: Headset: 1" YST 200 · Handlebar: 6061 T6 aluminum · Stem: SR CYS 50 · Saddle: Easy Racer Recliner-custom · Pedals: Victor Hi-Impact resin, toe-clip attachable
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.