Lowest0.69:1
Highest3.82:1
Total range555%
Estimated speed At 90 RPM
Lowest gear
Highest gear
Uses front tire 26×1.95; rear size isn’t listed.
Velopedia Bicycle Archive
2009 Diamondback Lux
Original specifications: SRAM X4 · 8-speed · mechanical rear derailleur · 26" wheels.
Planning to sell? Draft your listing
At a glance
Archive #18934- Model year
- 2009
- Category
- Mountain
- Sizes
- Womens xsmall, womens small, womens medium, womens large
- Colors
- Luminescent Yellow
- In this record
- 25 specifications · archived image
Model history 3 other years
Browse other years
Compare side by side
Identification clues
2009 archived details
- Published colors
- Luminescent Yellow
- Frame
- LUX W! butted 6061-T6 aluminum
- Original equipment
- SRAM X.4/mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildLUX W! butted 6061-T6 aluminum · SRAM X.4/mix · 26" wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | LUX W! butted 6061-T6 aluminum |
| Fork | Spinner Grind 1, 70mm travel |
| Fork Material | Single |
Drivetrain
| Component Group | SRAM X.4/mix |
|---|---|
| Shifters | SRAM X.4 trigger |
| Front Derailleur | MicroShift M20 |
| Rear Derailleur | SRAM X.4 |
| Crankset | TruVativ ISOFlow 3.0, 22/32/42 teeth |
| Bottom Bracket | Cartridge |
| Cassette | SRAM PG-820 |
| Rear Cogs | 8-speed, 11 - 32 teeth |
| Pedals | DB Platform |
Brakes
| Brakes | Alloy Linear Pull brakes, ProMax 3-Finger Lever levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" Aheadset |
|---|---|
| Handlebar | Avenir 100 Series Devine Riser |
| Handlebar Extensions | Not included |
| Stem | Avenir 100 31.8mm clamp |
| Saddle | WTB Speed She Devine Edition |
| Seatpost | Avenir 100 Series micro-adjust, 30.9mm diameter |
Wheels & Tires
| Hubs | Alloy |
|---|---|
| Rims | SSW26 alloy, 32-hole |
| Spokes | Stainless, 14ga. (2.0mm) |
| Front Tire | 26 x 1.95" Kenda Dual Sport |
| Wheel Size | 26" wheels |
No specifications match. Try a component name or clear your search.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Avenir 100 Series micro-adjust
30.9mm diameter
Retailer offers
Race Face Ride XC Seatpost Black, 30.9x375mm
Replacement option
More parts (4)Fewer parts
Alloy Linear Pull brakes
ProMax 3-Finger Lever levers
WTB Speed She Devine Edition
SRAM X.4
SRAM X.4 trigger
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 26 x 1.95" Kenda Dual Sport
- Drivetrain
- 8-speed
- Seatpost diameter
- 30.9 mm
- Bottom bracket / shell
- Cartridge
Equipment inspection checks 11 checks based on 6 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Spinner Grind 1, 70mm travel · Single
Suspension
Evaluate the suspension →Archived: Fork: Spinner Grind 1, 70mm travel
Drivetrain
Check drivetrain wear →Archived: Group: SRAM X.4/mix · Shifters: SRAM X.4 trigger · Front derailleur: MicroShift M20 · Rear derailleur: SRAM X.4 · Crankset: TruVativ ISOFlow 3.0, 22/32/42 teeth · Bottom bracket: Cartridge · Cassette: SRAM PG-820 · Rear cogs: 8-speed, 11 - 32 teeth
Brakes
Inspect the brakes →Archived: Brakes: Alloy Linear Pull brakes, ProMax 3-Finger Lever levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: SSW26 alloy, 32-hole · Hubs: Alloy · Front tire: 26 x 1.95" Kenda Dual Sport
Controls and contact points
Archived: Headset: 1 1/8" Aheadset · Handlebar: Avenir 100 Series Devine Riser · Stem: Avenir 100 31.8mm clamp · Seatpost: Avenir 100 Series micro-adjust, 30.9mm diameter · Saddle: WTB Speed She Devine Edition · Pedals: DB Platform
Have you owned this model?Help document firsthand fit, ride and maintenance details that may no longer be available.
This archive record has limited published detail. Share what would help another rider understand how this model fit, rode and held up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.