2026 Commencal Meta Power SX 800 Rockshox

Archived: Frame: META POWER SX 800, 180 mm travel; 29''-27.5'', Alloy 6066, triple butted tubes, T4, T6. Bolu bearings · Fork: ROCKSHOX ZEB Ultimate, 180 mm; 29", Charger 3.1 damper, HSR, LSR, HSC, LSC, Boost (15 x 110 mm), 44 mm offset

• Look for dents or shape changes and inspect the edges of welds around the head tube, bottom bracket, seat cluster and suspension mounts for hairline cracks.

Archived: Fork: ROCKSHOX ZEB Ultimate, 180 mm; 29", Charger 3.1 damper, HSR, LSR, HSC, LSC, Boost (15 x 110 mm), 44 mm offset · Rear shock: ROCKSHOX Super Deluxe Select; 230 x 65 mm, Debonair +, 2-postion (open/firm) lever, Rebound

• Inspect the fork stanchions for scratches or coating wear, look for oil or dirt rings at the seals, and cycle the fork through its travel while checking for binding or bushing play.
• Inspect the shock shaft and seals, cycle the rear suspension through its travel and check for oil, air loss, binding or unusual top-out and bottom-out noises.
• Hold the rear brake and load the suspension from several directions. Check pivots, bearings and mounting hardware for knock, looseness or side play.
• Ask for dated fork, shock and pivot-service records. A clean exterior does not establish the condition of internal seals, oil, bushings or bearings.

Archived: Shifters: SRAM Eagle 90; 12s · Rear derailleur: SRAM Eagle 90; 12s · Crankset: E13 Helix Core E*Spec, 155 mm crank arms, Bosch; Chainring: SRAM E-MTB T-Type, 34t for Bosch system, direct mount · Cassette: SRAM XS 1270 T-TYPE; 12s, 10-52t · Chain: SRAM GX T-Type; 12s, Flattop

• Shift through every available gear under light load. Hesitation, skipping or inconsistent indexing can reflect wear, damage, poor adjustment or mismatched replacement parts.
• Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: TRP DH-R EVO PRO, 4 pistons, resin pads; Rear rotor: TRP RS05 203 mm - Front rotor: TRP RS05 220 mm; 6-bolt, 2.3 mm width

• Inspect pads and braking surfaces, check the complete cable or hose path, and confirm both controls feel consistent and return cleanly.

Archived: Rims: DT SWISS H1900; Rear: 27.5'', 28h, 30 mm inner width - Front: 29'', 28h, 30 mm inner width · Hubs: DT SWISS 370; Rear: 28h, sealed bearings, 12 x 148 mm, SRAM XD - Front: 28h, sealed bearings, 15 x 110 mm · Front tire: MAXXIS ASSEGAI 29''; 29x2.50 WT, 3C MaxxGrip, New EXO+, TR · Rear tire: MAXXIS Minion DHRII 27.5''; 27.5x2.50 WT, 3C MaxxTerra, Double Down, TR

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance. This record indicates different front and rear wheel diameters, so verify each tire at its correct end.

Archived: Headset: ACROS ZS56 / ZS66; Alloy cups, stainless steel & sealed bearings · Stem: RIDE ALPHA 40; 40 mm extension, 31.8 mm · Seatpost: KS Ragei; 34.9 mm, 125 mm on S, 170 mm on M and 190 mm on L/XL · Saddle: FIZIK Terra Aidon X5; 145 mm width, Kium Mobius rails · Pedals: CRANKBROTHERS Stamp 1

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
• Check that the seatpost moves for adjustment and that the saddle, post and clamp hold securely without cracks, severe corrosion or damaged hardware.

Archived: Motor: BOSCH Performance Line CX Gen5; 120 Nm · Battery: BOSCH Powertube 800; Fully integrated main battery, 800 Wh; BOSCH 4A Battery Charger. Compact size & lightweight

• Inspect the battery case, mount, lock and electrical contacts for cracks, impact, corrosion, swelling, overheating marks or looseness. Confirm the battery charges normally.
• Confirm the correct charger, battery keys and removable system parts are included. Check charger cables and connectors for damage or improvised repairs.
• Power the system on from cold, check the display for warnings, and test every assist mode. Assistance should engage and stop predictably without intermittent cutouts or abnormal motor noise.
• Ask for available battery-health, cycle-count, diagnostic and firmware records. Confirm that replacement batteries and system support remain available before agreeing on value.