Velopedia Bicycle Archive
1997 Burley Samba
Original specifications: 26" wheels · 39.8 lb published weight · legacy reference geometry.
Planning to sell? Draft your listing
At a glance
Archive #64088- Model year
- 1997
- Category
- Tandem
- Original MSRP
- $1,500.00
- Sizes
- Captain 18"/stoker 15", captain 19.5"/stoker 17", captain 21"/stoker 18.5"
- Colors
- Jet black
- Weight
- 39.8 lb
- Geometry
- Legacy reference
- In this record
- 26 specifications · archived image · original MSRP · geometry
Model history 12 other years
Browse other years
Compare side by side
Identification clues
1997 archived details
- Published colors
- Jet black
- Frame
- True Temper Tandem chromoly, butted
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildTrue Temper Tandem chromoly, butted · 26" wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | True Temper Tandem chromoly, butted |
| Fork | Burley |
| Fork Material | True Temper Tandem chromoly, unicrown crown |
Drivetrain
| Shifters | Grip Shift SRT-400i |
|---|---|
| Front Derailleur | Sachs Centera, bottom-pull/clamp-on 28.6 mm |
| Rear Derailleur | Shimano STX-RC |
| Crankset | Sugino Fuse Tandem, 28/42/52 teeth |
| Bottom Bracket | Burley Tandem precision sealed, 117 mm spindle |
| BB Shell Width | 82mm Threadless |
| Rear Cogs | 7-speed, 11 - 28 teeth |
| Chain | Shimano CN-HG50, 1/2 x 3/32" |
| Pedals | Aluminum cage w/clips & straps |
Brakes
| Brakes | Shimano Alivio M-System brakes, Shimano Alivio levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" Tange-Seiki Avenger |
|---|---|
| Handlebar | Burley 6061 T6 aluminum |
| Handlebar Extensions | Not included |
| Stem | Burley chromoly |
| Saddle | Vetta Comfort |
| Seatpost | Aluminum micro-adjust, 26.6 mm diameter |
Wheels & Tires
| Hubs | Shimano Tandem |
|---|---|
| Rims | Weinmann 4019, 40-hole |
| Spokes | Marwi stainless steel, 2.0mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 26 x 1.40" Specialized Nimbus III |
| Wheel Size | 26" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 5 measurements
| Measurement | Legacy reference |
|---|---|
| Head-tube angle | 73° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 438 mm |
| Wheelbase | 1730 mm |
| Fork offset / rake | 42 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
Speed unavailable: wheel or tire size is missing or unclear.
Add your rear tire size to calculate speedHow it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
More parts (2)Fewer parts
26.6 mm diameter
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 26 x 1.40" Specialized Nimbus III
- Drivetrain
- 7-speed
- Seatpost diameter
- 26.6 mm
- Bottom bracket / shell
- Burley Tandem precision sealed, 117 mm spindle · 82mm Threadless
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Burley · True Temper Tandem chromoly, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Shifters: Grip Shift SRT-400i · Front derailleur: Sachs Centera, bottom-pull/clamp-on 28.6 mm · Rear derailleur: Shimano STX-RC · Crankset: Sugino Fuse Tandem, 28/42/52 teeth · Bottom bracket: Burley Tandem precision sealed, 117 mm spindle · Rear cogs: 7-speed, 11 - 28 teeth · Chain: Shimano CN-HG50, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Shimano Alivio M-System brakes, Shimano Alivio levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: Weinmann 4019, 40-hole · Hubs: Shimano Tandem · Front tire: 26 x 1.40" Specialized Nimbus III
Controls and contact points
Archived: Headset: 1 1/8" Tange-Seiki Avenger · Handlebar: Burley 6061 T6 aluminum · Stem: Burley chromoly · Seatpost: Aluminum micro-adjust, 26.6 mm diameter · Saddle: Vetta Comfort · Pedals: Aluminum cage w/clips & straps
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.


