2015 Breezer Repack Pro

Archived: Fork: Fox 34 FLOAT 27.5 O/C CTD, 1.5" Taper Steerer, 15QR Axle, Lockout, 160mm Travel

• Inspect the complete frame for cracks, dents, distortion, heavy abrasion, suspicious paint differences or evidence of a previous repair.

Archived: Fork: Fox 34 FLOAT 27.5 O/C CTD, 1.5" Taper Steerer, 15QR Axle, Lockout, 160mm Travel · Rear shock: Fox FLOAT CTD Boost Valve, 160mm Travel

• Inspect the fork stanchions for scratches or coating wear, look for oil or dirt rings at the seals, and cycle the fork through its travel while checking for binding or bushing play.
• Inspect the shock shaft and seals, cycle the rear suspension through its travel and check for oil, air loss, binding or unusual top-out and bottom-out noises.
• Hold the rear brake and load the suspension from several directions. Check pivots, bearings and mounting hardware for knock, looseness or side play.
• Ask for dated fork, shock and pivot-service records. A clean exterior does not establish the condition of internal seals, oil, bushings or bearings.

Archived: Shifters: Shimano SLX 20-Speed, I-Spec · Front derailleur: Shimano SLX 10-Speed, Direct Mount · Rear derailleur: Shimano Deore XT 10-Speed, SGS, Shadow Plus Design · Crankset: Shimano SLX 10-Speed, Hollowtech II, 38-24T · Bottom bracket: BB92 Press-Fit Bottom Bracket · Rear cogs: Shimano HG-50 10-Speed, 11-36T · Chain: KMC X10

• Shift through every available gear under light load. Hesitation, skipping or inconsistent indexing can reflect wear, damage, poor adjustment or mismatched replacement parts.
• Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: Shimano M615 Hydraulic Disc Brake, 180mm Front, 180mm Rear

• Squeeze each lever firmly. It should feel consistent and return cleanly. Check levers, hoses and calipers for fluid, inspect pad thickness and contamination, and examine rotors for wear or bending.

Archived: Wheel size: 27.5 · Rims: WTB Frequency ST i23 TCS 27.5" Rims (Tubeless-Ready) · Hubs: Breezer 15mm Thru-Axle 32H CenterLock Front / Shimano SLX 12mm Thru-Axle 32H CenterLock Rear · Front tire: WTB Vigilante 27.5x2.3" Race

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance.
• Confirm whether the bike is actually set up tubeless, whether both tires hold pressure, and when sealant and rim tape were last serviced.

Archived: Headset: FSA Orbit 1 1/8"-1 1/2", Fully Integrated, 36° ACB-Sealed, 7.8mm Aluminum Top Cover · Handlebar: Ritchey WCS TRAIL Rizer, 7050 Aluminum, 31.8, 740mm Wide, 20mm Rise, 9° Sweep · Stem: Ritchey WCS TRAIL, 3D-Forged 2014 Aluminum, Stainless Hardware, 31.8, 0°/90° · Seatpost: X-Fusion Hilo Ace Dropper, 125mm, 30.9mm · Saddle: WTB Volt, Satin Steel Rail

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
• Cycle the dropper post repeatedly. It should reach full travel, remain extended under load and have no unusual oil, excessive rotational play or damaged remote, cable, hose or battery.