Uses front tire 700C×23; rear size isn’t listed.
Velopedia Bicycle Archive
2002 Bianchi Brava
Original specifications: Shimano Sora Triple drivetrain · 700c wheels · legacy reference geometry.
Planning to sell? Draft your listing
At a glance
Archive #37493- Model year
- 2002
- Category
- Road
- Original MSRP
- $749.99
- Sizes
- 46cm, 49cm, 52cm, 55cm, 58cm, 61cm
- Colors
- Near Black, Vintage White
- Geometry
- Legacy reference
- In this record
- 26 specifications · archived image · original MSRP · geometry
Model history 11 other years
Browse other years
Compare side by side
Identification clues
2002 archived details
- Published colors
- Near Black, Vintage White
- Frame
- Reynolds 520
- Original equipment
- Shimano Sora Triple
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildReynolds 520 · Shimano Sora Triple · 700c wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | Reynolds 520 |
| Fork | Bianchi |
| Fork Material | Chromoly, double butted, unicrown crown |
Drivetrain
| Component Group | Shimano Sora Triple |
|---|---|
| Shifters | Shimano Sora STI Dual Control |
| Front Derailleur | Shimano Sora, bottom-pull/clamp-on |
| Rear Derailleur | Shimano Sora |
| Crankset | Bianchi Cyclone, 30/42/52 teeth |
| Bottom Bracket | Shimano cartridge, 118mm spindle |
| Rear Cogs | 8-speed, 12 - 25 teeth |
| Chain | KMC, 1/2 x 3/32" |
| Pedals | Wellgo clipless |
Brakes
| Brakes | Shimano Sora Dual Pivot brakes, Shimano Sora STI Dual Control levers |
|---|
Cockpit & Contact Points
| Headset | 1" VP |
|---|---|
| Handlebar | Aluminum drop bar |
| Handlebar Extensions | Not included |
| Stem | Bianchi aluminum |
| Saddle | Vetta/Bianchi Cosmos |
| Seatpost | Kalloy, 26.8mm diameter |
Wheels & Tires
| Hubs | Shimano Sora |
|---|---|
| Rims | Mavic CXP 21, 32-hole |
| Spokes | Stainless steel, 14ga. (2.0mm) straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 700 x 23c Vittoria Action HSD |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 550 mm |
| Head-tube angle | 72° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 410 mm |
| Wheelbase | 996 mm |
| Fork offset / rake | 50 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
1/2 x 3/32"
Replacement search: 8-speed bicycle chain Before ordering: Check chain width and length.More parts (4)Fewer parts
26.8mm diameter
32-hole
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 23c Vittoria Action HSD
- Drivetrain
- 8-speed
- Seatpost diameter
- 26.8 mm
- Bottom bracket / shell
- Shimano cartridge, 118mm spindle
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Bianchi · Chromoly, double butted, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Group: Shimano Sora Triple · Shifters: Shimano Sora STI Dual Control · Front derailleur: Shimano Sora, bottom-pull/clamp-on · Rear derailleur: Shimano Sora · Crankset: Bianchi Cyclone, 30/42/52 teeth · Bottom bracket: Shimano cartridge, 118mm spindle · Rear cogs: 8-speed, 12 - 25 teeth · Chain: KMC, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Shimano Sora Dual Pivot brakes, Shimano Sora STI Dual Control levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Mavic CXP 21, 32-hole · Hubs: Shimano Sora · Front tire: 700 x 23c Vittoria Action HSD
Controls and contact points
Archived: Headset: 1" VP · Handlebar: Aluminum drop bar · Stem: Bianchi aluminum · Seatpost: Kalloy, 26.8mm diameter · Saddle: Vetta/Bianchi Cosmos · Pedals: Wellgo clipless
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.





