Rear tire: 28 mm + 700C.
Velopedia Bicycle Archive
2025 Argon 18 Sum Pro Shimano Ultegra Di2
Original specifications: Shimano Ultegra Di2 drivetrain · 700c wheels · geometry for 6 published sizes.
Planning to sell? Draft your listing
At a glance
Archive #900002275- Model year
- 2025
- Category
- Road
- Original MSRP
- $8,500.00
- Sizes
- XXS, XS, S, M, L, XL
- Geometry
- 6 manufacturer sizes
- In this record
- 19 specifications · 2 archived images · original MSRP · geometry
Model history 1 other year
Browse other years
Compare side by side
Identification clues
2025 archived details
- Original equipment
- Shimano Ultegra Di2
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildShimano Ultegra Di2 · 700c
Frameset
| Frame Construction | SUM Pro |
|---|---|
| Fork | SUM Pro specific |
Drivetrain
| Component Group | Shimano Ultegra Di2 |
|---|---|
| Shifters | Shimano Ultegra Di2 R8170 |
| Front Derailleur | Shimano Ultegra Di2 R8150 |
| Rear Derailleur | Shimano Ultegra Di2 R8150 |
| Crankset | Shimano Ultegra R8100 52/36 |
| Bottom Bracket | CeramicSpeed BB86 Shimano Coated |
| Cassette | Shimano Ultegra CS-R8100 11-30 |
| Chain | Shimano Ultegra CN-M8100 |
Brakes
| Brakes | Shimano Ultegra Di2 R8170; Rotors: Shimano Ultegra RT-CL800 / F:160mm R:140mm |
|---|
Cockpit & Contact Points
| Headset | FSA Headset NO.55R 1.5'' + 3D |
|---|---|
| Handlebar | Vision Metron 5D ACR EVO |
| Saddle | Repente Quasar CR Carbon Rail |
| Seatpost | SUM specific (included with frameset) |
Wheels & Tires
| Wheels | DT Swiss ARC1400 Dicut Wheelset |
|---|---|
| Front Tire | Vittoria Corsa Pro TLR 28c |
| Rear Tire | Vittoria Corsa Pro TLR 28c |
| Wheel Size | 700c |
No specifications match. Try a component name or clear your search.
Geometry
Frame measurements by size.
Frame diagram
Select an available measurement to locate it on the frame.
All geometry measurements6 sizes · 11 measurements
| Measurement | XXS | XS | S | M | L | XL |
|---|---|---|---|---|---|---|
| Seat tube | 395 mm | 425 mm | 460 mm | 505 mm | 550 mm | 595 mm |
| Effective top tube | 503 mm | 520 mm | 538 mm | 557 mm | 578 mm | 600 mm |
| Head tube | 69 mm | 85 mm | 101 mm | 126 mm | 152 mm | 180 mm |
| Head-tube angle | 71.2° | 72.1° | 72.7° | 72.7° | 72.7° | 73° |
| Seat-tube angle | 75° | 74.5° | 74° | 73.5° | 73° | 72.5° |
| Chainstay / rear center | 410 mm | 410 mm | 410 mm | 410 mm | 410 mm | 410 mm |
| Wheelbase | 967 mm | 972 mm | 975 mm | 990 mm | 1006 mm | 1020 mm |
| Bottom-bracket drop | 69 mm | 73 mm | 77 mm | 77 mm | 77 mm | 77 mm |
| Reach | 375 mm | 382 mm | 389 mm | 397 mm | 405 mm | 414 mm |
| Stack | 471 mm | 493 mm | 516 mm | 540 mm | 565 mm | 592 mm |
| Standover height | 676 mm | 700 mm | 727 mm | 766 mm | 804 mm | 841 mm |
Dimensions as recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
More parts (8)Fewer parts
Rotors: Shimano Ultegra RT-CL800 / F:160mm R:140mm
Based on the original build. Check fit and installed parts before ordering.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- Vittoria Corsa Pro TLR 28c
- Rear tire
- Vittoria Corsa Pro TLR 28c
- Drivetrain
- Shimano Ultegra Di2
- Bottom bracket / shell
- CeramicSpeed BB86 Shimano Coated
Equipment inspection checks 11 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: SUM Pro · Fork: SUM Pro specific
Drivetrain
Check drivetrain wear →Archived: Group: Shimano Ultegra Di2 · Shifters: Shimano Ultegra Di2 R8170 · Front derailleur: Shimano Ultegra Di2 R8150 · Rear derailleur: Shimano Ultegra Di2 R8150 · Crankset: Shimano Ultegra R8100 52/36 · Bottom bracket: CeramicSpeed BB86 Shimano Coated · Cassette: Shimano Ultegra CS-R8100 11-30 · Chain: Shimano Ultegra CN-M8100
Brakes
Inspect the brakes →Archived: Brakes: Shimano Ultegra Di2 R8170; Rotors: Shimano Ultegra RT-CL800 / F:160mm R:140mm
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c · Wheels: DT Swiss ARC1400 Dicut Wheelset · Front tire: Vittoria Corsa Pro TLR 28c · Rear tire: Vittoria Corsa Pro TLR 28c
Controls and contact points
Archived: Headset: FSA Headset NO.55R 1.5'' + 3D · Handlebar: Vision Metron 5D ACR EVO · Seatpost: SUM specific (included with frameset) · Saddle: Repente Quasar CR Carbon Rail
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Gallery2 images
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.





